Hi, Remy Bohmer wrote: > Hello Michael, > > 2008/12/12 Michael Trimarchi <trimar...@gandalf.sssup.it>: >> EHCI fix code and ixp4xx test. >> USB ehci configuration parameter: >> >> #define CONFIG_CMD_USB 1 >> #define CONFIG_USB_STORAGE 1 >> #define CONFIG_USB_EHCI >> #define CONFIG_USB_EHCI_IXP4XX 1 >> #define CONFIG_EHCI_IS_TDI 1 >> #define CONFIG_EHCI_DESC_BIG_ENDIAN 1 >> #define CONFIG_EHCI_MMIO_BIG_ENDIAN 1 >> #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 >> #define CONFIG_LEGACY_USB_INIT_SEQ 1 >> >> 2 USB Device(s) found >> scanning bus for storage devices... 0 Storage Device(s) found >> => usb tree >> >> Device Tree: >> 1 Hub (1.5MBit/s, 0mA) >> | u-boot EHCI Host Controller >> | >> |+-2 Mass Storage (12MBit/s, 100mA) >> Sony Storage Media 0C07040930296 >> >> => >> >> Signed-off-by: Michael Trimarchi <trimarchimich...@yahoo.it> >> --- >> drivers/usb/usb_ehci.h | 51 ++++++++++-------- >> drivers/usb/usb_ehci_core.c | 127 >> ++++++++++++++++++++++++++----------------- >> 2 files changed, 106 insertions(+), 72 deletions(-) > > Applied to u-boot-usb (next) > > I had some weird problems re-basing your patches, it looked like git > choked on the [PATCH] keyword in the headers, resulting in different > patch titles and it was complaining about empty commits. Can you > please review if the next-tree is still as you expect? (I believe I > fixed it all, so I expect no real problems) > > Thanks, > > Remy > Thank's a lot, I'll check later. I have these things in my todo list: - ehci-pci.c support to the usb pci device - create an ehci struct that contains controller description - rebase the ixp465 patch and then add the usb_ehci_ixp4xx support
Is it ok? are there any suggests? Michael _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
