On 20:37 Thu 11 Dec , Roman Mashak wrote: > Hello > > 2008/12/11 Roman Mashak <[EMAIL PROTECTED]>: > > Briefly about the memory map: before remap NOR flash is at 0x0 and > > SDRAM 0x10000000, after remap -- SDRAM is mapped at 0x0. I've built > > a U-Boot image linked to 0x0, as I want to load it in RAM, so I linked > > it to 0x0. > > > > Loading this image via JTAG into target RAM goes fine, but hangs at > > 'start_armboot()', right after: > > Oops, I've found the part of problem. I should have been linked to > 0x01000000. It's not hanging in 'start_armboot()', but it outputs > garbage on console instead of valid text messages. I've checked serial > port settings, seems to be correct. What else may be the issue?
First could you give us few information as which CPU, Target and U-Boot version do you work on? Best Regards, J. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
