[U-Boot] [PATCH 1/2] ppc4xx: Fix Ethernet PHY LED configuration on PMC440 boards

[Matthias Fuchs]

Signed-off-by: Matthias Fuchs <[EMAIL PROTECTED]>
---
 board/esd/pmc440/pmc440.c |   22 ++++++++++++++++++----
 1 files changed, 18 insertions(+), 4 deletions(-)

diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c
index 8563d7d..4d81c33 100644
--- a/board/esd/pmc440/pmc440.c
+++ b/board/esd/pmc440/pmc440.c
@@ -755,17 +755,31 @@ int post_hotkeys_pressed(void)
 #ifdef CONFIG_RESET_PHY_R
 void reset_phy(void)
 {
+       char *s;
+       unsigned short val_method, val_behavior;
+
+       /* special LED setup for NGCC/CANDES */
+       if ((s = getenv("bd_type")) &&
+           ((!strcmp(s, "ngcc")) || (!strcmp(s, "candes")))) {
+               val_method   = 0x0e0a;
+               val_behavior = 0x0cf2;
+       } else {
+               /* PMC440 standard type */
+               val_method   = 0x0e10;
+               val_behavior = 0x0cf0;
+       }
+
        if (miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x1f, 0x0001) == 0) {
                miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x11, 0x0010);
-               miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x11, 0x0df0);
-               miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x10, 0x0e10);
+               miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x11, 
val_behavior);
+               miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x10, val_method);
                miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x1f, 0x0000);
        }
 
        if (miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x1f, 0x0001) == 0) {
                miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x11, 0x0010);
-               miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x11, 0x0df0);
-               miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x10, 0x0e10);
+               miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x11, 
val_behavior);
+               miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x10, 
val_method);
                miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x1f, 0x0000);
        }
 }
-- 
1.5.3

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot