According to coldfire manual data timeout > address time out
also use correct macro to program XARB_CFG
Signed-off-by: Arun C <[EMAIL PROTECTED]>
---
cpu/mcf547x_8x/cpu_init.c | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/cpu/mcf547x_8x/cpu_init.c b/cpu/mcf547x_8x/cpu_init.c
index 1ba5783..96a3132 100644
--- a/cpu/mcf547x_8x/cpu_init.c
+++ b/cpu/mcf547x_8x/cpu_init.c
@@ -49,14 +49,14 @@ void cpu_init_f(void)
volatile xlbarb_t *xlbarb = (volatile xlbarb_t *) MMAP_XARB;
xlbarb->adrto = 0x2000;
- xlbarb->datto = 0x2000;
+ xlbarb->datto = 0x2500;
xlbarb->busto = 0x3000;
- xlbarb->cfg = XARB_SR_AT | XARB_SR_DT;
+ xlbarb->cfg = XARB_CFG_AT | XARB_CFG_DT;
/* Master Priority Enable */
- xlbarb->pri = 0;
xlbarb->prien = 0xff;
+ xlbarb->pri = 0;
#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) &&
defined(CONFIG_SYS_CS0_CTRL))
fbcs->csar0 = CONFIG_SYS_CS0_BASE;
--
1.5.3.4
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
