On Wednesday 03 December 2008, Sean MacLennan wrote: > We use a 256M NAND on the PIKA Warp appliance and where unable to boot > u-boot from the NAND. It worked on a smaller 64M NAND.
Currently you need to define the page-size of the NAND used for booting (512 bytes vs. 2k). The 2k 4xx NAND booting support is was done about 1/2 a year ago. So perhaps you tested this when this 2k support was not available yet. > So we put our FPGA and u-boot in a small NOR. The kernel, rootfs and > other files are on the NAND. Yes, I would recommend to do it this way if possible. A small NOR for U-Boot and environment and everything else in NAND. This makes things much easier. But I understand that this is sometimes a problem with space (2 FLASH chips) and costs. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [EMAIL PROTECTED] ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
