2008/11/20 Wolfgang Denk <[EMAIL PROTECTED]>: > Dear Simon, > > In message <[EMAIL PROTECTED]> you wrote: >> >> I'm trying to install a Linux kernel 2.6.22 on my U-boot git from October >> 2008. >> It look like this: >> >> => bootm fc010000 - fc008000 >> ## Booting kernel from Legacy Image at fc010000 ... >> Image Name: Linux-2.6.22 >> Image Type: PowerPC Linux Kernel Image (gzip compressed) >> Data Size: 773524 Bytes = 755.4 kB > ----------------------------------^^^^^^^^ > > Which architecture are you talking about? PowerPC? > >> Any suggest why U-boot act like this? > > Your kernel image looks way too small for a 2.6.2x PowerPC kernel > image. Are you sure you are using a sane configuration which includes > all the essentiual things? > > And did you try a port-mortem dump of the log buffer? > > Best regards, > > Wolfgang Denk > > -- > DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] > There's another way to survive. Mutual trust -- and help. > -- Kirk, "Day of the Dove", stardate unknown >
I'm sorry, It is a modified MPC8360 platform. I'm quite sure about kernel, the only interface I am going to use is the serial interface. When the kernel does'nt booting up there is nothing in the log to see. (Disabled autostart) Do you know where I can find the file where maps the U-boot code to RAM? Or how is it made? U-boot.map shows only where the functions is stored at flash but I need to know where they are executing in RAM... /Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
