Dear Jon Loeliger, In message <[EMAIL PROTECTED]> you wrote: > The following changes since commit 1378174a1351c0285736863a665ab758fe8d5f71: > Wolfgang Denk (1): > Merge branch 'master' of /home/wd/git/u-boot/custodians > > are available in the git repository at: > > git://www.denx.de/git/u-boot-mpc86xx.git masterges since commit > > Becky Bruce (18): > mpc8641: Stop supporting non-PCI_PNP configs > mpc8641: Make PCI and RIO mutually exclusive, fix non-PCI build > powerpc 86xx: Handle CCSR relocation earlier > 86xx: Make dram_size a phys_size_t > 8641HPCN: Config file cleanup > powerpc: change 86xx SMP boot method > mpc8641: Remove extra "0" from BR2 define > mpc86xx: Move setup_bats into cpu_init_f > mpc8641: only define CONFIG_ENV_SIZE once > mpc8641: Drop imaginary second flash bank, map 8MB > mpc8641: make DIAG_ADDR == FLASH_BASE > mpc86xx: Use SRR0/1/rfi to enable address translation, not blr > mpc86xx: Change early FLASH mapping to 1M at CONFIG_MONITOR_BASE_EARLY > mpc8641: Change 32-bit memory map > mpc8641: Support 36-bit physical addressing > toplevel Makefile: Add MPC8641HPCN_36BIT target > mpc8641: Try to detect old .dts files > lib_ppc: Move trap_init to occur earlier > > Jon Loeliger (1): > Merge commit 'wd/master' > > Makefile | 8 +- > board/freescale/mpc8610hpcd/mpc8610hpcd.c | 6 +- > board/freescale/mpc8641hpcn/config.mk | 2 +- > board/freescale/mpc8641hpcn/law.c | 35 ++-- > board/freescale/mpc8641hpcn/mpc8641hpcn.c | 66 ++++--- > cpu/mpc86xx/Makefile | 4 + > cpu/mpc86xx/cpu_init.c | 8 + > cpu/mpc86xx/fdt.c | 21 ++ > cpu/mpc86xx/mp.c | 68 +++++++ > cpu/mpc86xx/mp.h | 7 + > cpu/mpc86xx/release.S | 169 +++++++++++++++++ > cpu/mpc86xx/start.S | 186 ++++++++----------- > doc/README.mpc8641hpcn | 64 +++++-- > include/configs/MPC8610HPCD.h | 40 +++- > include/configs/MPC8641HPCN.h | 289 ++++++++++++++++++++-------- > include/configs/sbc8641d.h | 16 ++ > lib_ppc/board.c | 10 +- > 17 files changed, 721 insertions(+), 278 deletions(-)
Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] A man is not complete until he is married -- then he is finished. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
