Dear Jean-Christophe PLAGNIOL-VILLARD, In message <[EMAIL PROTECTED]> you wrote: > Siemens SX1 Cellphone V1 > - ARM OMAP310 processor > - SRAM 192 kB > - SDRAM 32 MB at 0x10000000 > - Boot flash 16 MB at 0x00000000 > - Application flash 8 MB at 0x04000000 > - 3 serial ports > - 1 SecureDigital > - 1 LCD display > - 1 RTC > > Siemens SX1 Cellphone V2 > - ARM OMAP310 processor > - SRAM 192 kB > - SDRAM 32 MB at 0x10000000 > - Boot flash 32 MB at 0x00000000 > - 3 serial ports > - 1 SecureDigital > - 1 LCD display > - 1 RTC > > U-Boot (mainline) and Linux kernel (2.6.26) tested > > Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <[EMAIL PROTECTED]> > --- > add qemu-doc > and fix QEMUMachine var name (invert between v1 and v2) > > Best Regards, > J. > Makefile.target | 2 +- > hw/boards.h | 4 + > hw/omap_sx1.c | 236 > ++++++++++++++++++++++++++++++++++++++++++++++++++ > qemu-doc.texi | 26 ++++++ > target-arm/machine.c | 2 + > 5 files changed, 269 insertions(+), 1 deletions(-) > create mode 100644 hw/omap_sx1.c > > diff --git a/Makefile.target b/Makefile.target > index a15cbe0..03db021 100644 > --- a/Makefile.target > +++ b/Makefile.target
What's Makefile.target ? There is no such file in mainline. [And I don't want to have any file by such a name either.] > OBJS+= zaurus.o ide.o serial.o nand.o ecc.o spitz.o tosa.o tc6393xb.o > OBJS+= omap1.o omap_lcdc.o omap_dma.o omap_clk.o omap_mmc.o omap_i2c.o > OBJS+= omap2.o omap_dss.o soc_dma.o > -OBJS+= palm.o tsc210x.o > +OBJS+= omap_sx1.o palm.o tsc210x.o > OBJS+= nseries.o blizzard.o onenand.o vga.o cbus.o tusb6010.o usb-musb.o > OBJS+= tsc2005.o bt-hci-csr.o > OBJS+= mst_fpga.o mainstone.o > diff --git a/hw/boards.h b/hw/boards.h What's hw/ ? There is no such firectory in mainline. > diff --git a/hw/omap_sx1.c b/hw/omap_sx1.c > new file mode 100644 > index 0000000..e699549 > --- /dev/null > +++ b/hw/omap_sx1.c And, as you certainly know, the SX1 is already supported by the code in board/sx1/ ? Are you really sure this patch was for the U-Boot mailing list? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] Lead me not into temptation... I can find it myself. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
