Hi 2008/11/5 John Rigby <[EMAIL PROTECTED]>: > Reworked MPC5121 NAND driver. > Attempted to address all the problems listed by Scott Wood. > Driver is now board independent. Will still need more > work to be SOC independent. > > Driver for the NAND controller on MPC5121. > > This driver has been tested on ADS5121 rev4 / MPC5121e rev2 only > which has the following configuration: > 2K page size > 8 bit device width > > This should work on other boards with MPC5121 rev2 silicon with > little or no change to the driver. > > Various vintages of this controller exist on some iMX parts. > Getting it to work on an iMX with the same controller version > should be fairly easy. More work if it is an iMX with a different > version on the controller.
The i.MX31 seems to have NFC v1 while i.MX32 has v2, would that mean that your driver is likely to work with i.MX32? Regards, Magnus _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
