Dear Stefan Roese, In message <[EMAIL PROTECTED]> you wrote: > The following changes since commit d685b74c64a38849f1a129b3ab846fbf67dd937e: > Dave Liu (1): > 74xx: use r4 instead of r2 in lock_ram_in_cache and > unlock_ram_in_cache > > are available in the git repository at: > > git://www.denx.de/git/u-boot-ppc4xx.git master > > Matthias Fuchs (6): > ppc4xx: Handle other board variant in PMC440 FPGA code > ppc4xx: Clean up PMC440 header > ppc4xx: Fix esd loadpci command > ppc4xx: Update PMC440 board configuration > ppc4xx: Fix PMC440 BSP commands > ppc4xx: Update PMC440 board support > > Ricardo Ribalda Delgado (1): > ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg > > Stefan Roese (2): > ppc4xx: Correctly configure the GPIO pin muxing on Arches > ppc4xx: Fix spelling error in MAINTAINERS file > > MAINTAINERS | 4 +- > board/avnet/fx12mm/xparameters.h | 2 +- > board/esd/common/cmd_loadpci.c | 24 +++++-- > board/esd/pmc440/cmd_pmc440.c | 70 ++++++++++--------- > board/esd/pmc440/fpga.c | 5 +- > board/esd/pmc440/pmc440.c | 128 +++++++++++++++++++++++++++++------ > board/esd/pmc440/pmc440.h | 17 ++--- > include/configs/PMC440.h | 70 ++++++++++++-------- > include/configs/canyonlands.h | 12 +++- > include/configs/fx12mm.h | 3 - > include/configs/ml507.h | 6 +- > include/configs/xilinx-ppc.h | 136 > ++++++++++++++++++++++++++++++++++++++ > include/configs/xilinx-ppc405.h | 91 +------------------------- > include/configs/xilinx-ppc440.h | 88 ++----------------------- > 14 files changed, 372 insertions(+), 284 deletions(-) > create mode 100644 include/configs/xilinx-ppc.h
Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] backups: always in season, never out of style. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
