Dear Jean-Christophe PLAGNIOL-VILLARD, I will remove all unnecessary white spaces from the previous patch. I have now a patch version for u-boot u-boot v2008.10
> > " > > > > ######################################################################### > > diff --git a/Makefile b/Makefile > > index 7c13ce8..5b0acae 100644 > > --- a/Makefile > > +++ b/Makefile > > @@ -2487,15 +2487,6 @@ shannon_config : unconfig > > at91rm9200dk_config : unconfig > > @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200 > > > > -at91sam9261ek_config : unconfig > > - @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9261ek atmel at91 > > - > > -at91sam9263ek_config : unconfig > > - @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9263ek atmel at91 > > - > > -at91sam9rlek_config : unconfig > > - @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9rlek atmel at91 > > - > > cmc_pu2_config : unconfig > > @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200 > > > > @@ -2521,6 +2512,18 @@ at91cap9adk_config : unconfig > > at91sam9260ek_config : unconfig > > @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9260ek atmel at91 > > > > +at91sam9261ek_config : unconfig > > + @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9261ek atmel at91 > > + > > +at91sam9263ek_config : unconfig > > + @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9263ek atmel at91 > > + > > +at91sam9rlek_config : unconfig > > + @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9rlek atmel at91 > > + > > +sam9l9260_config : unconfig > > + @$(MKCONFIG) $(@:_config=) arm arm926ejs sam9l9260 olimex at91 > > + > why do you touch other at91 config? I touched other configs because i tried to put correctly boards with arm920t and arm926ejs in their sections. I belive that at91sam9261ek at91sam9263ek should be placed in the arm926ejs core section. Please correct me if i'm wrong. > > +#ifndef __CONFIG_H > > +#define __CONFIG_H > > + > > +/* Hostname */ > > +#define CONFIG_HOSTNAME sam9l9260 > > + > > +/* ARM asynchronous clock */ > > +#define AT91_MAIN_CLOCK 198656000 /* from 18.432 MHz > > crystal */ > > +#define AT91_MASTER_CLOCK 99328000 /* peripheral = main / 2 */ > > +#define CFG_HZ 1000000 /* 1us resolution */ > please update to CONFIG_SYS_ > Note that I've plan and announce that I'll generate a common code for > at91sam9260 and other to reduce duplicate code. I can change CFG_HZ to CONFIG_SYS_HZ but that macro is used in /cpu/arm926ejs/at91/timer.c. If I change the macro from timer.c I should update all at91 configurations but I can test only on Olimex (at91sam9260) board. I do not know if it's safe to modify other configurations without appropriate testing. Regards, Cristian _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
