We don't actually ever do this, remove the code so we
can stop maintaining it.

Signed-off-by: Becky Bruce <[EMAIL PROTECTED]>
---
 board/freescale/mpc8641hpcn/mpc8641hpcn.c |   22 +---------------------
 include/configs/MPC8641HPCN.h             |    6 ------
 2 files changed, 1 insertions(+), 27 deletions(-)

diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c 
b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
index 9635cfc..c7e10d8 100644
--- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c
+++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
@@ -121,27 +121,7 @@ fixed_sdram(void)
 
 
 #if defined(CONFIG_PCI)
-/*
- * Initialize PCI Devices, report devices found.
- */
-
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_fsl86xxads_config_table[] = {
-       {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-        PCI_IDSEL_NUMBER, PCI_ANY_ID,
-        pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
-                                    PCI_ENET0_MEMADDR,
-                                    PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}},
-       {}
-};
-#endif
-
-
-static struct pci_controller pci1_hose = {
-#ifndef CONFIG_PCI_PNP
-       config_table:pci_mpc86xxcts_config_table
-#endif
-};
+static struct pci_controller pci1_hose;
 #endif /* CONFIG_PCI */
 
 #ifdef CONFIG_PCI2
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index abf2a58..0bf5888 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -341,12 +341,6 @@ extern unsigned long get_board_sys_clk(unsigned long 
dummy);
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     15
 #define CONFIG_SYS_OHCI_SWAP_REG_ACCESS        1
 
-#if !defined(CONFIG_PCI_PNP)
-    #define PCI_ENET0_IOADDR   0xe0000000
-    #define PCI_ENET0_MEMADDR  0xe0000000
-    #define PCI_IDSEL_NUMBER   0x0c    /* slot0->3(IDSEL)=12->15 */
-#endif
-
 /*PCIE video card used*/
 #define VIDEO_IO_OFFSET                CONFIG_SYS_PCI2_IO_PHYS
 
-- 
1.5.5.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to