Hi Wolfgang, On Friday 31 October 2008, Wolfgang Denk wrote: > Of course the end result looks better. There is no doubt about that. > But it has disadvantages, too. With the row of dots you can easily > see how long you've been waiting - this visualizes variations in > timing behaviour that may be indications for problems; also it > clearly shows where we have to wait too long, i. e. where optimi- > zations are needed. > > > I understand that the spinning wheel is not optimal for logfiles, but for > > the normal usage it just looks nicer for my taste. So I would prefer to > > stay with the spinning wheel, but if you decide that the 4xx DDR2 > > calibration mustn't use this, then let's apply your patch for the > > cpu/ppc4xx files. > > It is my understanding that a rework of this code is under way which > will avoid the long delay for the standard boot sequence (and only > need it for board bringup or intentional recalibration).
Are you talking about storing the optimized autocalibration values in FLASH, as discussed on IRC some time ago? I don't know if somebody is working on this. I only know that AMCC is working on a fix for the autocalibration on Kilauea. Not sure if this effects the bootup time, I can only hope it does. > For this > purpose, the row of dots is IMHO more useful than the spinning wheel. > > Assuming my understanding is correct (is it?), then we could fix this > now as well. Again, if you decide that that's the way to go, then I will not object. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [EMAIL PROTECTED] ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot