Dear rajeev s, In message <[EMAIL PROTECTED]> you wrote: > > We have a custom board based on coldfire (MCF5484) Similar to MCF5484 Kitlite > The board runs Coldfire as PCI agent , 64MB of SDRAM, 4 MB of Bootflash and > the PCI bus as a slave (no serial > port->no console) > I can flash U-boot using the JTAG . Can you let know how can i pass the > Commands over PCI . > I do not have a Console to do that ?
Well, somebody who designed this system must also have had some plan how to operate the board? Not having a console port sounds like a really stupid thing to me. If you have ethenret on your board, you can try netconsole. But it will be no fun to port U-Boot to such hardware. I suggest you bring the board back to the hardware guys and ask for a serial console port, at least for bring-up and debugging. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] "In matrimony, to hesitate is sometimes to be saved." - Butler _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot