-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, i have a strange problem with the saveenv command, or maybe with my config :)
After booting a fresh compiled u-boot with the default environment i can save the env without any problems. U-boot unprotect, erase and write the flash. but after add a new env-variable, e.g. bootargs, saveenv will unprotect the flash, erase the flash but then u-boot will not write the flash because the "Flash not Erased" error. Is there a different in addressing the env during boot-time, or read and write ? #define CONFIG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_SIZE 0x2000 // a 8k sector at the beginning of the flash #define CONFIG_ENV_SECT_SIZE 0x2000 #define CONFIG_SYS_ENV_OFFSET 0x0000 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_ENV_OFFSET) TEXT_BASE = 0xFFC00000 CONFIG_SYS_FLASH_BASE = 0xFFC0000 Thanks Georg -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAkkK5JwACgkQUicxT/v10Zu2igCeNnAhiiCejeyubKK83rJPclVo EJsAoKBcL1+TjxVtGRmSB1XqgQkAoIKZ =CHB9 -----END PGP SIGNATURE----- _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
