Dear Andy Fleming,
In message <[EMAIL PROTECTED]> you wrote:
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-mpc85xx.git master
>
> Dave Liu (2):
> 85xx: remove unused config definition
> 85xx: Fix the incorrect register used for DDR erratum1
>
> Kumar Gala (12):
> 85xx: Use CONFIG_SYS_CACHELINE_SIZE instead of magic number
> 85xx: Add basic e500mc core support
> pci: Allow for PCI addresses to be 64-bit
> 85xx: Enable 64-bit PCI resources on all Freescale boards
> 86xx: Enable 64-bit PCI resources on all Freescale boards
> fdt: Add fdt_getprop_u32_default helpers
> fdt: Added helper to set PCI dma-ranges property
> pci/fsl_pci_init: Enable larger address and setting inbound windows
> properly
> pci/fsl_pci_init: Add a common PCI inbound setup function
> pci/fsl_pci_init: Added fdt helper for setting up bus-ranges &
> dma-ranges
> 85xx: Convert all fsl_pci_init users to new APIs
> 86xx: Convert all fsl_pci_init users to new APIs
>
> board/atum8548/atum8548.c | 77 +++++-----------
> board/freescale/mpc8536ds/mpc8536ds.c | 110 ++++++++---------------
> board/freescale/mpc8544ds/mpc8544ds.c | 109 ++++++++---------------
> board/freescale/mpc8548cds/mpc8548cds.c | 57 ++++--------
> board/freescale/mpc8568mds/mpc8568mds.c | 56 ++++--------
> board/freescale/mpc8572ds/mpc8572ds.c | 72 +++++----------
> board/freescale/mpc8610hpcd/mpc8610hpcd.c | 78 +++++-----------
> board/freescale/mpc8641hpcn/mpc8641hpcn.c | 53 ++++--------
> board/sbc8548/sbc8548.c | 66 ++++----------
> board/sbc8641d/sbc8641d.c | 55 ++++--------
> board/tqc/tqm85xx/tqm85xx.c | 58 ++++--------
> common/fdt_support.c | 96 ++++++++++++++++++++
> cpu/mpc85xx/cpu.c | 4 +
> cpu/mpc85xx/ddr-gen3.c | 9 ++-
> cpu/mpc85xx/release.S | 8 ++
> cpu/mpc85xx/start.S | 6 +-
> drivers/pci/fsl_pci_init.c | 139
> ++++++++++++++++++++++++++---
> drivers/pci/pci.c | 37 ++++++---
> drivers/pci/pci_auto.c | 88 +++++++++++--------
> include/asm-ppc/cache.h | 2 +
> include/configs/ATUM8548.h | 5 -
> include/configs/MPC8536DS.h | 14 +---
> include/configs/MPC8540ADS.h | 1 +
> include/configs/MPC8541CDS.h | 1 +
> include/configs/MPC8544DS.h | 6 +-
> include/configs/MPC8548CDS.h | 6 +-
> include/configs/MPC8555CDS.h | 1 +
> include/configs/MPC8560ADS.h | 1 +
> include/configs/MPC8568MDS.h | 6 +-
> include/configs/MPC8572DS.h | 16 +---
> include/configs/MPC8610HPCD.h | 6 +-
> include/configs/MPC8641HPCN.h | 6 +-
> include/configs/TQM85xx.h | 5 -
> include/configs/sbc8548.h | 5 -
> include/configs/sbc8641d.h | 5 -
> include/fdt_support.h | 7 ++
> include/pci.h | 40 +++++----
> 37 files changed, 624 insertions(+), 687 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
Power is danger.
-- The Centurion, "Balance of Terror", stardate 1709.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
