Haavard Skinnemoen wrote: > The information displayed when CONFIG_LCD_INFO is set is inherently > board-specific, so it should be done by the board code. The current code > dealing with this only handles two cases, and is already a horrible mess > of #ifdeffery. > > Yes, this duplicates some code, but it also allows boards to print more > board-specific information; this used to be very difficult. > > Signed-off-by: Haavard Skinnemoen <[EMAIL PROTECTED]> > --- > board/atmel/at91cap9adk/at91cap9adk.c | 29 ++++++++++ > board/atmel/at91sam9261ek/at91sam9261ek.c | 29 ++++++++++ > board/atmel/at91sam9263ek/at91sam9263ek.c | 29 ++++++++++ > board/atmel/at91sam9rlek/at91sam9rlek.c | 29 ++++++++++ > board/lwmon/lwmon.c | 29 ++++++++++ > board/tqc/tqm8xx/tqm8xx.c | 26 +++++++++ > common/lcd.c | 84 > ++--------------------------- > include/lcd.h | 2 + > 8 files changed, 178 insertions(+), 79 deletions(-)
Applied to u-boot-video/master repo. Thanks! Also fixed by s/CFG_MAX_NAND_DEVICE/CONFIG_SYS_MAX_NAND_DEVICE as it is needed since commit 6d0f6bcf337c5261c08fabe12982178c2c489d76. Best regards, Anatolij -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [EMAIL PROTECTED] _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
