We must invalidate TLBs before MMU turn on, but
currently the code is not, if there are some stale
TLB entry valid in the TLBs, it will cause strange
issue.
Signed-off-by: Dave Liu <[EMAIL PROTECTED]>
---
cpu/mpc86xx/start.S | 5 ++++-
1 files changed, 4 insertions(+), 1 deletions(-)
diff --git a/cpu/mpc86xx/start.S b/cpu/mpc86xx/start.S
index 159f3e1..30e6047 100644
--- a/cpu/mpc86xx/start.S
+++ b/cpu/mpc86xx/start.S
@@ -202,8 +202,12 @@ boot_warm:
mtmsr 0
#endif
+ /* Invalidate BATs */
bl invalidate_bats
sync
+ /* Invalidate all of TLB before MMU turn on */
+ bl clear_tlbs
+ sync
#ifdef CONFIG_SYS_L2
/* init the L2 cache */
@@ -275,7 +279,6 @@ in_flash:
/* setup the rest of the bats */
bl setup_bats
- bl clear_tlbs
sync
#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR)
--
1.5.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
