> -----Original Message----- > From: Stefan Roese [mailto:[EMAIL PROTECTED] > Sent: Thursday, October 23, 2008 4:15 AM > To: u-boot@lists.denx.de > Cc: Wolfgang Denk; Markus Klotzbücher; Adam Graham; Victor Gallardo > Subject: Re: [U-Boot] amcc kilauea odd crashes > > Hi Wolfgang, > > On Thursday 23 October 2008, Wolfgang Denk wrote: > > In message <[EMAIL PROTECTED]> you wrote: > > > Is this a 600MHz Kilauea? This is a known issue, that the new > > > autocalibration > > > > No, this is a CPU Rev. A board at 400 Mhz. > > Probably with the same DDR2 frequency.
Correct, the important clocking is the DDR2 frequency and not the CPU frequency (i.e. the PLB of 200MHz set on this board). > > > > code has a problem here. I reported this problem a few weeks ago. > > > AMCC is currently working on a fix for this. > > > > Should we not backout the autocalib patches that cause the problem > > until a stable working solution is found? > > Not sure. My hope is that AMCC find a solution quickly. They > should receive the failing board this week. > > And they already did send a "fix" (more a workaround) for > this problem: > > [PATCH v2] ppc4xx: Fix DDR2 auto calibration on Kilauea 600MHz > > which you rejected. So I suggest to wait for a few days. > > Victor, Adam, did you already receive my board? We have not received your board yet. Do you have a shipping tracking number we can check? Thanks, Adam > > Best regards, > Stefan > > ===================================================================== > DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: > [EMAIL PROTECTED] > ===================================================================== > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
