Hi Wolfgang, On Thursday 23 October 2008, Wolfgang Denk wrote: > In message <[EMAIL PROTECTED]> you wrote: > > Is this a 600MHz Kilauea? This is a known issue, that the new > > autocalibration > > No, this is a CPU Rev. A board at 400 Mhz.
Probably with the same DDR2 frequency. > > code has a problem here. I reported this problem a few weeks ago. AMCC is > > currently working on a fix for this. > > Should we not backout the autocalib patches that cause the problem > until a stable working solution is found? Not sure. My hope is that AMCC find a solution quickly. They should receive the failing board this week. And they already did send a "fix" (more a workaround) for this problem: [PATCH v2] ppc4xx: Fix DDR2 auto calibration on Kilauea 600MHz which you rejected. So I suggest to wait for a few days. Victor, Adam, did you already receive my board? Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [EMAIL PROTECTED] ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
