Hello Stefan,
Do you have any comments on the below patch?
Regards,
Bartlomiej Sieka
Bartlomiej Sieka wrote:
> The upcoming automatic update feature needs the ability to adjust an
> address within Flash to the end of its respective sector. Factor out
> this functionality to a new function flash_sect_roundb().
>
> Signed-off-by: Rafal Czubak <[EMAIL PROTECTED]>
> Signed-off-by: Bartlomiej Sieka <[EMAIL PROTECTED]>
> ---
> common/cmd_flash.c | 75
> +++++++++++++++++++++++++++++-----------------------
> include/flash.h | 1 +
> 2 files changed, 43 insertions(+), 33 deletions(-)
>
> diff --git a/common/cmd_flash.c b/common/cmd_flash.c
> index 18d2250..29e5b6d 100644
> --- a/common/cmd_flash.c
> +++ b/common/cmd_flash.c
> @@ -105,6 +105,47 @@ abbrev_spec (char *str, flash_info_t ** pinfo, int *psf,
> int *psl)
> }
>
> /*
> + * Take *addr in Flash and adjust it to fall on the end of its sector
> + */
> +int flash_sect_roundb (ulong *addr)
> +{
> + flash_info_t *info;
> + ulong bank, sector_end_addr;
> + char found;
> + int i;
> +
> + /* find the end addr of the sector where the *addr is */
> + found = 0;
> + for (bank = 0; bank < CFG_MAX_FLASH_BANKS && !found; ++bank) {
> + info = &flash_info[bank];
> + for (i = 0; i < info->sector_count && !found; ++i) {
> + /* get the end address of the sector */
> + if (i == info->sector_count - 1) {
> + sector_end_addr = info->start[0] +
> + info->size - 1;
> + } else {
> + sector_end_addr = info->start[i+1] - 1;
> + }
> +
> + if (*addr <= sector_end_addr &&
> + *addr >= info->start[i]) {
> + found = 1;
> + /* adjust *addr if necessary */
> + if (*addr < sector_end_addr)
> + *addr = sector_end_addr;
> + } /* sector */
> + } /* bank */
> + }
> + if (!found) {
> + /* error, addres not in flash */
> + printf("Error: end address (0x%08lx) not in flash!\n", *addr);
> + return 1;
> + }
> +
> + return 0;
> +}
> +
> +/*
> * This function computes the start and end addresses for both
> * erase and protect commands. The range of the addresses on which
> * either of the commands is to operate can be given in two forms:
> @@ -126,8 +167,6 @@ addr_spec(char *arg1, char *arg2, ulong *addr_first,
> ulong *addr_last)
> {
> char *ep;
> char len_used; /* indicates if the "start +length" form used */
> - char found;
> - ulong bank;
>
> *addr_first = simple_strtoul(arg1, &ep, 16);
> if (ep == arg1 || *ep != '\0')
> @@ -157,38 +196,8 @@ addr_spec(char *arg1, char *arg2, ulong *addr_first,
> ulong *addr_last)
> * sector boundary, so that the commands don't fail later on.
> */
>
> - /* find the end addr of the sector where the *addr_last is */
> - found = 0;
> - for (bank = 0; bank < CFG_MAX_FLASH_BANKS && !found; ++bank){
> - int i;
> - flash_info_t *info = &flash_info[bank];
> - for (i = 0; i < info->sector_count && !found; ++i){
> - /* get the end address of the sector */
> - ulong sector_end_addr;
> - if (i == info->sector_count - 1){
> - sector_end_addr =
> - info->start[0] + info->size - 1;
> - } else {
> - sector_end_addr =
> - info->start[i+1] - 1;
> - }
> - if (*addr_last <= sector_end_addr &&
> - *addr_last >= info->start[i]){
> - /* sector found */
> - found = 1;
> - /* adjust *addr_last if necessary */
> - if (*addr_last < sector_end_addr){
> - *addr_last = sector_end_addr;
> - }
> - }
> - } /* sector */
> - } /* bank */
> - if (!found){
> - /* error, addres not in flash */
> - printf("Error: end address (0x%08lx) not in flash!\n",
> - *addr_last);
> + if (flash_sect_roundb(addr_last) > 0)
> return -1;
> - }
> } /* "start +length" from used */
>
> return 1;
> diff --git a/include/flash.h b/include/flash.h
> index af8a7c0..6f5d7d5 100644
> --- a/include/flash.h
> +++ b/include/flash.h
> @@ -91,6 +91,7 @@ extern void flash_print_info (flash_info_t *);
> extern int flash_erase (flash_info_t *, int, int);
> extern int flash_sect_erase (ulong addr_first, ulong addr_last);
> extern int flash_sect_protect (int flag, ulong addr_first, ulong addr_last);
> +extern int flash_sect_roundb (ulong *addr);
>
> /* common/flash.c */
> extern void flash_protect (int flag, ulong from, ulong to, flash_info_t
> *info);
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
