Hi, I'm working on SH7727 T-Engine Board (MS7727CP02)(sh3) and I'm trying to load Hello World example in U-boot (use Serial, ymodem and hello_world.bin), ... => loady 0x8e000000 ## Ready for binary (ymodem) download to 0x8E000000 at 115200 bps... CCCxyzModem - CRC mode, 2(SOH)/69(STX)/0(CAN) packets, 5 retries ## Total Size = 0x000112ec = 70380 Bytes => go 0x8e000000 ## Starting application at 0x8E000000 ... ... but my board reset when I run Hello world. I also try with hello_world.srec (serial, Kermit mode) and an uboot image: "mkimage -A sh -O u-boot -T standalone -C none -a 0x8c000000 -e 0x8c000000 -n 'Hello Image' -d examples/hello_world hello.img" ... => loady ## Ready for binary (ymodem) download to 0x8E000000 at 115200 bps... CCxyzModem - CRC mode, 2(SOH)/69(STX)/0(CAN) packets, 4 retries ## Total Size = 0x0001132c = 70444 Bytes => bootm 0x8e000000 * kernel: cmdline image address = 0x8e000000 ## Booting kernel from Legacy Image at 8e000000 ... Image Name: Hello Image Image Type: SuperH U-Boot Standalone Program (uncompressed) Data Size: 70380 Bytes = 68.7 kB Load Address: 8c000000 Entry Point: 8c000000 Verifying Checksum ... OK Wrong Image Type for bootm command ERROR: can't get kernel image! ... Could you give me an advice? I think i have wrong image format? But how can I get correct format ?
Best regards. -- View this message in context: http://www.nabble.com/Run-hello-world-with-Uboot-%21-tp19851315p19851315.html Sent from the Uboot - Users mailing list archive at Nabble.com. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
