Changed MIMC200 board setup and config to use CONFIG_DISABLE_CONSOLE.
Also fixed default uImage location.
Signed-off-by: Mark Jackson <[EMAIL PROTECTED]>
---
board/mimc/mimc200/mimc200.c | 2 +-
include/configs/mimc200.h | 6 +++---
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/board/mimc/mimc200/mimc200.c b/board/mimc/mimc200/mimc200.c
index 8516dcb..fd497b2 100644
--- a/board/mimc/mimc200/mimc200.c
+++ b/board/mimc/mimc200/mimc200.c
@@ -82,7 +82,7 @@ int board_early_init_f(void)
/* are we suppressing the console ? */
if (gpio_get_value(GPIO_PIN_PE21) == 1)
- gd->flags |= GD_FLG_SILENT;
+ gd->flags |= (GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE);
/* reset phys */
gpio_select_pio(GPIO_PIN_PE24, 0);
diff --git a/include/configs/mimc200.h b/include/configs/mimc200.h
index da307ac..0345b4a 100644
--- a/include/configs/mimc200.h
+++ b/include/configs/mimc200.h
@@ -74,12 +74,12 @@
#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS
\
- "console=ttyS0 root=/dev/mtdblock1 fbmem=600k rootfstype=jffs2"
+ "root=/dev/mtdblock1 rootfstype=jffs2 console=ttyS1"
#define CONFIG_BOOTCOMMAND \
- "fsload; bootm"
+ "fsload boot/uImage; bootm"
#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */
-#define CONFIG_SILENT_CONSOLE_INPUT 1 /* disable console inputs */
+#define CONFIG_DISABLE_CONSOLE 1 /* disable console */
#define CFG_DEVICE_NULLDEV 1 /* include nulldev device */
/*
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
