Dear "Rodrigo Vilar",
please keep the mailing list copied.
In message <[EMAIL PROTECTED]> you wrote:
>
> > > Are "Standalone Applications" supported in the current u-boot (GIT repo)?
> >
> > Yes, of course.
>
> I am very happy to hear that. However the manual states "The bootm command
> is used to start operating system images." and Standalone Applications were
> supported on u-boot 1.2.0.
Standalone Applications are no operating systems,m so "bootm" is the
wrong command.
Standalone Applications have been supported virtually forever.
> > I recommend you start reading the documentation, especally the section
> > about Standalone Applications.
>
> If you refer to chapter 5.12 I had already done so. It has been very useful
> to download an run standalone applications however there is no reference on
> how to do it with image files and bootm.
That's because Standalone Applications don't use image files and
bootm. They use the "go" command as documented in the manual.
Is this so difficult?
> appreciate the work you are doing with u-boot, however I also think you have
> overlooked my questions.
No, I haven't. If I tell you to read the documentation I am usually
sure that the solution is theree. And the very first example (5.12.1.
"Hello World" Demo) indeed shows how to run a SA application (not to
mention that there is at least one relevant FAQ entry).
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
When it is incorrect, it is, at least *authoritatively* incorrect.
- Hitchiker's Guide To The Galaxy
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
