Split to meet mailing list size limit
Initial addition of eNET files - builds clean but will not run until
additional i386 code changes are made
Signed-off-by: Graeme Russ <[EMAIL PROTECTED]>
--
diff --git a/MAKEALL b/MAKEALL
index 9ccb9ac..6f65870 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -645,6 +645,7 @@ LIST_I486=" \
sc520_cdp \
sc520_spunk \
sc520_spunk_rel \
+ sc520_eNET \
"
LIST_x86=" \
diff --git a/Makefile b/Makefile
index 7c13ce8..cdfca1c 100644
--- a/Makefile
+++ b/Makefile
@@ -2843,6 +2843,12 @@ sc520_spunk_config : unconfig
sc520_spunk_rel_config : unconfig
@$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk
+#########################################################################
+## Serck eNET
+#########################################################################
+eNET_config : unconfig
+ @$(MKCONFIG) $(@:_config=) i386 i386 eNET
+
#========================================================================
# MIPS
#========================================================================
diff --git a/board/eNET/Makefile b/board/eNET/Makefile
new file mode 100644
index 0000000..a124b33
--- /dev/null
+++ b/board/eNET/Makefile
@@ -0,0 +1,57 @@
+#
+# (C) Copyright 2008
+# Graeme Russ, [EMAIL PROTECTED]
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, [EMAIL PROTECTED]
+#
+# (C) Copyright 2002
+# Daniel Engström, Omicron Ceti AB, [EMAIL PROTECTED]
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := eNET.o flash.o fpga.o
+SOBJS := eNET_start16.o eNET_start.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/eNET/config.mk b/board/eNET/config.mk
new file mode 100644
index 0000000..6797f8a
--- /dev/null
+++ b/board/eNET/config.mk
@@ -0,0 +1,25 @@
+#
+# (C) Copyright 2002
+# Daniel Engström, Omicron Ceti AB, [EMAIL PROTECTED]
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+
+TEXT_BASE = 0x38040000
diff --git a/board/eNET/eNET.c b/board/eNET/eNET.c
new file mode 100644
index 0000000..1b4af58
--- /dev/null
+++ b/board/eNET/eNET.c
@@ -0,0 +1,640 @@
+/*
+ *
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB <[EMAIL PROTECTED]>.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <asm/io.h>
+#include <asm/pci.h>
+#include <asm/ic/sc520.h>
+#include <spi.h>
+
+#ifdef CONFIG_HW_WATCHDOG
+#include <watchdog.h>
+#endif
+
+#include "hardware.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#undef SC520_CDP_DEBUG
+
+#ifdef SC520_CDP_DEBUG
+#define PRINTF(fmt,args...) printf (fmt ,##args)
+#else
+#define PRINTF(fmt,args...)
+#endif
+
+
+extern int do_autoscript (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern int do_bdinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern int do_go (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern int do_bootd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern int do_iminfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+/* extern int do_imls (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); */
+extern int do_coninfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern int do_itest (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern int do_load_serial (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern int do_load_serial_bin (cmd_tbl_t *cmdtp, int flag, int argc, char
*argv[]);
+extern int do_mem_md (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern int do_mem_mm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern int do_mem_nm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern int do_mem_mw (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern int do_mem_cp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern int do_mem_cmp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern int do_mem_crc (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern int do_mem_base (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern int do_mem_loop (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern int do_mem_mtest (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern int do_sleep (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern int do_printenv (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern int do_setenv (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern int do_saveenv (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern int do_run (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern int do_imgextract (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern int do_version (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern int do_echo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern int do_help (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+
+void hw_watchdog_reset(void)
+{
+ u16 wd_state;
+
+ wd_state = readw(CFG_WATCHDIG_PIO_DATA);
+
+ if (wd_state & CFG_WATCHDOG_PIO_BIT) {
+ /* Watchdog output high - lower it*/
+ writew(CFG_WATCHDOG_PIO_BIT, CFG_WATCHDIG_PIO_CLR);
+ }
+ else {
+ /* Watchdog output low - raise it*/
+ writew(CFG_WATCHDOG_PIO_BIT, CFG_WATCHDIG_PIO_SET);
+ }
+}
+
+/* ------------------------------------------------------------------------- */
+
+void init_sc520_enet (void)
+{
+
+ /* Set the UARTxCTL register at it's slower,
+ * baud clock giving us a 1.8432 MHz reference
+ */
+ write_mmcr_byte(SC520_UART1CTL, 7);
+
+
+ /* enable PCI bus arbitrer */
+/* mov ebx, SYSARBCTL ; SC520 control bits
for the CPU bus arbiter and the PCI bus arbiter. */
+/* mov byte ptr [ebx], 06h ;
*/
+ write_mmcr_byte(SC520_SYSARBCTL,0x06); /* enable concurrent mode */
+
+
+ /* ?? mov ebx, SYSARBMENB ; SC520
System Arbiter Master Enable */
+/* ?? mov word ptr [ebx], 0003h ;
*/
+ write_mmcr_word(SC520_SYSARBMENB, 0x0003); /* enable external grants */
+
+
+ if (CFG_SC520_HIGH_SPEED) {
+ write_mmcr_byte(SC520_CPUCTL, 0x2); /* set it to 133 MHz
and write back */
+ gd->cpu_clk = 133000000;
+/* printf("## CPU Speed set to 133MHz\n"); */
+ } else {
+ write_mmcr_byte(SC520_CPUCTL, 1); /* set CPU to 100 MHz
and write back cache */
+/* printf("## CPU Speed set to 100MHz\n"); */
+ gd->cpu_clk = 100000000;
+ }
+
+
+ /* wait at least one millisecond */
+ asm("movl $0x2000,%%ecx\n"
+ "wait_loop: pushl %%ecx\n"
+ "popl %%ecx\n"
+ "loop wait_loop\n": : : "ecx");
+
+ /* turn on the SDRAM write buffer */
+ write_mmcr_byte(SC520_DBCTL, 0x11);
+
+ /* turn on the cache and disable write through */
+ asm("movl %%cr0, %%eax\n"
+ "andl $0x9fffffff, %%eax\n"
+ "movl %%eax, %%cr0\n" : : : "eax");
+}
+
+/*
+ * Theory:
+ * We first set up all IRQs to be non-pci, edge triggered,
+ * when we later enumerate the pci bus and pci_sc520_fixup_irq() gets
+ * called we reallocate irqs to the pci bus with sc520_pci_set_irq()
+ * as needed. Whe choose the irqs to gram from a configurable list
+ * inside pci_sc520_fixup_irq() (If this list contains stupid irq's
+ * such as 0 thngas will not work)
+ */
+
+static void irq_init(void)
+{
+#if 0
+ /* disable global interrupt mode */
+ write_mmcr_byte(SC520_PICICR, 0x40);
+
+ /* set all irqs to edge */
+ write_mmcr_byte(SC520_MPICMODE, 0x00);
+ write_mmcr_byte(SC520_SL1PICMODE, 0x00);
+ write_mmcr_byte(SC520_SL2PICMODE, 0x00);
+
+ /* active low polarity on PIC interrupt pins,
+ * active high polarity on all other irq pins */
+/* write_mmcr_word(SC520_INTPINPOL, 0x0000); */
+
+ /* set irq number mapping */
+ write_mmcr_byte(SC520_GPTMR1MAP, SC520_IRQ_DISABLED); /* disable GP
timer 1 INT */
+ write_mmcr_byte(SC520_GPTMR2MAP, SC520_IRQ_DISABLED); /* disable GP
timer 2 INT */
+ write_mmcr_byte(SC520_PIT0MAP, SC520_IRQ0); /* Set PIT
timer 0 INT to IRQ0 */
+ write_mmcr_byte(SC520_PIT1MAP, SC520_IRQ_DISABLED); /* disable PIT
timer 1 INT */
+ write_mmcr_byte(SC520_PIT2MAP, SC520_IRQ_DISABLED); /* disable PIT
timer 2 INT */
+ write_mmcr_byte(SC520_PCIINTCMAP, SC520_IRQ_DISABLED); /* disable PCI
INT C */
+ write_mmcr_byte(SC520_PCIINTDMAP, SC520_IRQ_DISABLED); /* disable PCI
INT D */
+ write_mmcr_byte(SC520_DMABCINTMAP, SC520_IRQ_DISABLED); /* disable DMA
INT */
+ write_mmcr_byte(SC520_SSIMAP, SC520_IRQ_DISABLED); /* disable
Synchronius serial INT */
+ write_mmcr_byte(SC520_WDTMAP, SC520_IRQ_DISABLED); /* disable
Watchdog INT */
+ write_mmcr_byte(SC520_RTCMAP, SC520_IRQ8); /* Set RTC int
to 8 */
+ write_mmcr_byte(SC520_WPVMAP, SC520_IRQ_DISABLED); /* disable
write protect INT */
+ write_mmcr_byte(SC520_ICEMAP, SC520_IRQ1); /* Set ICE
Debug Serielport INT to IRQ1 */
+ write_mmcr_byte(SC520_FERRMAP,SC520_IRQ13); /* Set FP error
INT to IRQ13 */
+#endif
+
+/* mov ebx, UART1MAP ; UART1MAP interrupt map
*/
+/* mov byte ptr [ebx], 02h ; connect to Master PIC IR1
*/
+/* mov ebx, GPTMR0MAP ; GP Timer 0 Interrupt Mapping
*/
+/* mov byte ptr [ebx], 01h ; connect to Master PIC IR0
*/
+/* mov ebx, PCIINTAMAP ; PCI Interrupt A Mapping
Register (INTA_INT) */
+/* mov byte ptr [ebx], 03h ; connect to Slave 1 PIC IR0
*/
+/* mov ebx, PCIINTBMAP ; PCI Interrupt B Mapping
Register (INTB_INT) */
+/* mov byte ptr [ebx], 04h ; connect to Slave 1 PIC IR1
*/
+/* mov ebx, GP0IMAP ; GPIRQ0 interrupt map
(UART_A_INT) */
+/* mov byte ptr [ebx], 07h ; connect to Slave 1 PIC IR4
*/
+/* mov ebx, GP1IMAP ; GPIRQ1 interrupt map
(UART_B_INT) */
+/* mov byte ptr [ebx], 08h ; connect to Slave 1 PIC IR5
*/
+/* mov ebx, GP2IMAP ; GPIRQ2 interrupt map
(UART_C_INT) */
+/* mov byte ptr [ebx], 09h ; connect to Slave 1 PIC IR6
*/
+/* mov ebx, GP3IMAP ; GPIRQ3 interrupt map
(UART_D_INT) */
+/* mov byte ptr [ebx], 0ah ; connect to Slave 1 PIC IR7
*/
+/* mov ebx, GP4IMAP ; GPIRQ4 interrupt map
(DPRAM1_INT) */
+/* mov byte ptr [ebx], 0bh ; connect to Master PIC IR3
*/
+/* mov ebx, GP6IMAP ; GPIRQ6 interrupt map
(IRIG_INT) */
+/* mov byte ptr [ebx], 0ch ; connect to Master PIC IR4
*/
+/* mov ebx, GP7IMAP ; GPIRQ7 interrupt map
(EXP1_INT) */
+/* mov byte ptr [ebx], 0eh ; connect to Slave 2 PIC IR1
*/
+/* mov ebx, GP8IMAP ; GPIRQ8 interrupt map
(EXP2_INT) */
+/* mov byte ptr [ebx], 0fh ; connect to Slave 2 PIC IR2
*/
+/* mov ebx, GP9IMAP ; GPIRQ9 interrupt map
(EXP3_INT) */
+/* mov byte ptr [ebx], 010h ; connect to Slave 2 PIC IR3
*/
+/* mov ebx, GP10IMAP ; GPIRQ10 interrupt map
(EXP4_INT or I2C_INT) */
+/* mov byte ptr [ebx], 011h ; connect to Slave 2 PIC IR4
*/
+/* mov ebx, BOOTCSCTL ; BOOTCS Control Register
*/
+/* mov word ptr [ebx], 0033h ; 3 wait states
*/
+/* mov ebx, ROMCS1CTL ; ROMCS1 Control Register
*/
+/* mov word ptr [ebx], 0615h
*/
+/* mov ebx, ROMCS2CTL ; ROMCS2 Control Register
*/
+/* mov word ptr [ebx], 0615h
*/
+/* mov ebx, ADDDECCTL ; SC520 Address Decode Control
Register */
+/* mov byte ptr [ebx], 02h ; Enable RTC & UART1, Disable
UART2 */
+
+ write_mmcr_word(SC520_INTPINPOL, 0x0410);
+ write_mmcr_byte(SC520_UART1MAP, 0x02);
+ write_mmcr_byte(SC520_GPTMR0MAP, 0x01);
+ write_mmcr_byte(SC520_PCIINTAMAP, 0x03);
+ write_mmcr_byte(SC520_PCIINTBMAP, 0x04);
+ write_mmcr_byte(SC520_GP0IMAP, 0x07);
+ write_mmcr_byte(SC520_GP1IMAP, 0x08);
+ write_mmcr_byte(SC520_GP2IMAP, 0x09);
+ write_mmcr_byte(SC520_GP3IMAP, 0x0a);
+ write_mmcr_byte(SC520_GP4IMAP, 0x0b);
+ write_mmcr_byte(SC520_GP6IMAP, 0x0c);
+ write_mmcr_byte(SC520_GP7IMAP, 0x0e);
+ write_mmcr_byte(SC520_GP8IMAP, 0x0f);
+ write_mmcr_byte(SC520_GP9IMAP, 0x10);
+ write_mmcr_byte(SC520_GP10IMAP, 0x11);
+ write_mmcr_word(SC520_BOOTCSCTL, 0x0033);
+ write_mmcr_word(SC520_ROMCS1CTL, 0x0615);
+ write_mmcr_word(SC520_ROMCS2CTL, 0x0615);
+ write_mmcr_byte(SC520_ADDDECCTL, 0x02);
+
+/* write_mmcr_byte(SC520_GP5IMAP, SC520_IRQ5); */ /* Set
GPIRQ5 (ISA IRQ5) to IRQ5 */
+/* write_mmcr_byte(SC520_GP0IMAP, SC520_IRQ11); */ /* Set
GPIRQ0 (ISA IRQ11) to IRQ10 */
+/* write_mmcr_byte(SC520_UART2MAP, SC520_IRQ_DISABLED); */ /*
disable internal UART2 INT */
+/* write_mmcr_word(SC520_PCIHOSTMAP, 0x11f); */ /* Map
PCI hostbridge INT to NMI */
+/* write_mmcr_word(SC520_ECCMAP, 0x100); */ /* Map
SDRAM ECC failure INT to NMI */
+
+}
+
+#if 0
+/* PCI stuff */
+static void pci_sc520_cdp_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
+{
+ /* a configurable lists of irqs to steal
+ * when we need one (a board with more pci interrupt pins
+ * would use a larger table */
+ static int irq_list[] = {
+ CFG_FIRST_PCI_IRQ,
+ CFG_SECOND_PCI_IRQ,
+ CFG_THIRD_PCI_IRQ,
+ CFG_FORTH_PCI_IRQ
+ };
+ static int next_irq_index=0;
+
+ unsigned char tmp_pin;
+ int pin;
+
+ pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_PIN, &tmp_pin);
+ pin = (int)tmp_pin;
+
+ pin-=1; /* pci config space use 1-based numbering */
+ if (-1 == pin) {
+ return; /* device use no irq */
+ }
+
+
+ /* map device number + pin to a pin on the sc520 */
+ switch (PCI_DEV(dev)) {
+ case 20:
+ pin+=SC520_PCI_INTA;
+ break;
+
+ case 19:
+ pin+=SC520_PCI_INTB;
+ break;
+
+ case 18:
+ pin+=SC520_PCI_INTC;
+ break;
+
+ case 17:
+ pin+=SC520_PCI_INTD;
+ break;
+
+ default:
+ return;
+ }
+
+ pin&=3; /* wrap around */
+
+ if (sc520_pci_ints[pin] == -1) {
+ /* re-route one interrupt for us */
+ if (next_irq_index > 3) {
+ return;
+ }
+ if (pci_sc520_set_irq(pin, irq_list[next_irq_index])) {
+ return;
+ }
+ next_irq_index++;
+ }
+
+
+ if (-1 != sc520_pci_ints[pin]) {
+ pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE,
+ sc520_pci_ints[pin]);
+ }
+ PRINTF("fixup_irq: device %d pin %c irq %d\n",
+ PCI_DEV(dev), 'A' + pin, sc520_pci_ints[pin]);
+}
+
+static struct pci_controller sc520_cdp_hose = {
+ fixup_irq: pci_sc520_cdp_fixup_irq,
+};
+
+void pci_init_board(void)
+{
+ pci_sc520_init(&sc520_cdp_hose);
+}
+#endif
+
+#if 0
+/* set up the ISA bus timing and system address mappings */
+static void bus_init(void)
+{
+
+ /* set up the GP IO pins */
+ write_mmcr_word(SC520_PIOPFS31_16, 0xf7ff); /* set the GPIO pin
function 31-16 reg */
+ write_mmcr_word(SC520_PIOPFS15_0, 0xffff); /* set the GPIO pin
function 15-0 reg */
+ write_mmcr_byte(SC520_CSPFS, 0xf8); /* set the CS pin
function reg */
+ write_mmcr_byte(SC520_CLKSEL, 0x70);
+
+
+ write_mmcr_byte(SC520_GPCSRT, 1); /* set the GP CS offset */
+ write_mmcr_byte(SC520_GPCSPW, 3); /* set the GP CS pulse width */
+ write_mmcr_byte(SC520_GPCSOFF, 1); /* set the GP CS offset */
+ write_mmcr_byte(SC520_GPRDW, 3); /* set the RD pulse width */
+ write_mmcr_byte(SC520_GPRDOFF, 1); /* set the GP RD offset */
+ write_mmcr_byte(SC520_GPWRW, 3); /* set the GP WR pulse width */
+ write_mmcr_byte(SC520_GPWROFF, 1); /* set the GP WR offset */
+
+ write_mmcr_word(SC520_BOOTCSCTL, 0x1823); /* set up
timing of BOOTCS */
+ write_mmcr_word(SC520_ROMCS1CTL, 0x1823); /* set up
timing of ROMCS1 */
+ write_mmcr_word(SC520_ROMCS2CTL, 0x1823); /* set up
timing of ROMCS2 */
+
+ /* adjust the memory map:
+ * by default the first 256MB (0x00000000 - 0x0fffffff) is mapped to
SDRAM
+ * and 256MB to 1G-128k (0x1000000 - 0x37ffffff) is mapped to PCI mmio
+ * we need to map 1G-128k - 1G (0x38000000 - 0x3fffffff) to CS1 */
+
+ /* SRAM = GPCS3 128k @ d0000-effff*/
+ write_mmcr_long(SC520_PAR2, 0x4e00400d);
+
+ /* IDE0 = GPCS6 1f0-1f7 */
+ write_mmcr_long(SC520_PAR3, 0x380801f0);
+
+ /* IDE1 = GPCS7 3f6 */
+ write_mmcr_long(SC520_PAR4, 0x3c0003f6);
+ /* bootcs */
+ write_mmcr_long(SC520_PAR12, 0x8bffe800);
+ /* romcs2 */
+ write_mmcr_long(SC520_PAR13, 0xcbfff000);
+ /* romcs1 */
+ write_mmcr_long(SC520_PAR14, 0xabfff800);
+ /* 680 LEDS */
+ write_mmcr_long(SC520_PAR15, 0x30000640);
+
+ write_mmcr_byte(SC520_ADDDECCTL, 0);
+
+ asm ("wbinvd\n"); /* Flush cache, req. after setting the unchached
attribute ona PAR */
+}
+#endif
+
+#if 0
+/*
+ * This function should map a chunk of size bytes
+ * of the system address space to the ISA bus
+ *
+ * The function will return the memory address
+ * as seen by the host (which may very will be the
+ * same as the bus address)
+ */
+u32 isa_map_rom(u32 bus_addr, int size)
+{
+ u32 par;
+
+ PRINTF("isa_map_rom asked to map %d bytes at %x\n",
+ size, bus_addr);
+
+ par = size;
+ if (par < 0x80000) {
+ par = 0x80000;
+ }
+ par >>= 12;
+ par--;
+ par&=0x7f;
+ par <<= 18;
+ par |= (bus_addr>>12);
+ par |= 0x50000000;
+
+ PRINTF ("setting PAR11 to %x\n", par);
+
+ /* Map rom 0x10000 with PAR1 */
+ write_mmcr_long(SC520_PAR11, par);
+
+ return bus_addr;
+}
+
+/*
+ * this function removed any mapping created
+ * with pci_get_rom_window()
+ */
+void isa_unmap_rom(u32 addr)
+{
+ PRINTF("isa_unmap_rom asked to unmap %x", addr);
+ if ((addr>>12) == (read_mmcr_long(SC520_PAR11)&0x3ffff)) {
+ write_mmcr_long(SC520_PAR11, 0);
+ PRINTF(" done\n");
+ return;
+ }
+ PRINTF(" not ours\n");
+}
+#endif
+
+#ifdef CONFIG_PCI
+#define PCI_ROM_TEMP_SPACE 0x10000
+/*
+ * This function should map a chunk of size bytes
+ * of the system address space to the PCI bus,
+ * suitable to map PCI ROMS (bus address < 16M)
+ * the function will return the host memory address
+ * which should be converted into a bus address
+ * before used to configure the PCI rom address
+ * decoder
+ */
+u32 pci_get_rom_window(struct pci_controller *hose, int size)
+{
+ u32 par;
+
+ par = size;
+ if (par < 0x80000) {
+ par = 0x80000;
+ }
+ par >>= 16;
+ par--;
+ par&=0x7ff;
+ par <<= 14;
+ par |= (PCI_ROM_TEMP_SPACE>>16);
+ par |= 0x72000000;
+
+ PRINTF ("setting PAR1 to %x\n", par);
+
+ /* Map rom 0x10000 with PAR1 */
+ write_mmcr_long(SC520_PAR1, par);
+
+ return PCI_ROM_TEMP_SPACE;
+}
+
+/*
+ * this function removed any mapping created
+ * with pci_get_rom_window()
+ */
+void pci_remove_rom_window(struct pci_controller *hose, u32 addr)
+{
+ PRINTF("pci_remove_rom_window: %x", addr);
+ if (addr == PCI_ROM_TEMP_SPACE) {
+ write_mmcr_long(SC520_PAR1, 0);
+ PRINTF(" done\n");
+ return;
+ }
+ PRINTF(" not ours\n");
+
+}
+
+/*
+ * This function is called in order to provide acces to the
+ * legacy video I/O ports on the PCI bus.
+ * After this function accesses to I/O ports 0x3b0-0x3bb and
+ * 0x3c0-0x3df shuld result in transactions on the PCI bus.
+ *
+ */
+int pci_enable_legacy_video_ports(struct pci_controller *hose)
+{
+ /* Map video memory to 0xa0000*/
+ write_mmcr_long(SC520_PAR0, 0x7200400a);
+
+ /* forward all I/O accesses to PCI */
+ write_mmcr_byte(SC520_ADDDECCTL,
+ read_mmcr_byte(SC520_ADDDECCTL) | IO_HOLE_DEST_PCI);
+
+
+ /* so we map away all io ports to pci (only way to access pci io
+ * below 0x400. But then we have to map back the portions that we dont
+ * use so that the generate cycles on the GPIO bus where the sio and
+ * ISA slots are connected, this requre the use of several PAR registers
+ */
+
+ /* bring 0x100 - 0x1ef back to ISA using PAR5 */
+ write_mmcr_long(SC520_PAR5, 0x30ef0100);
+
+ /* IDE use 1f0-1f7 */
+
+ /* bring 0x1f8 - 0x2f7 back to ISA using PAR6 */
+ write_mmcr_long(SC520_PAR6, 0x30ff01f8);
+
+ /* com2 use 2f8-2ff */
+
+ /* bring 0x300 - 0x3af back to ISA using PAR7 */
+ write_mmcr_long(SC520_PAR7, 0x30af0300);
+
+ /* vga use 3b0-3bb */
+
+ /* bring 0x3bc - 0x3bf back to ISA using PAR8 */
+ write_mmcr_long(SC520_PAR8, 0x300303bc);
+
+ /* vga use 3c0-3df */
+
+ /* bring 0x3e0 - 0x3f5 back to ISA using PAR9 */
+ write_mmcr_long(SC520_PAR9, 0x301503e0);
+
+ /* ide use 3f6 */
+
+ /* bring 0x3f7 back to ISA using PAR10 */
+ write_mmcr_long(SC520_PAR10, 0x300003f7);
+
+ /* com1 use 3f8-3ff */
+
+ return 0;
+}
+#endif
+
+/*
+ * Miscelaneous platform dependent initializations
+ */
+
+int board_init(void)
+{
+/* init_sc520(); */
+
+ init_sc520_enet();
+
+ /* bus_init(); */
+
+ irq_init();
+
+ /* max drive current on SDRAM */
+/* write_mmcr_word(SC520_DSCTL, 0x0100); */
+
+ /* enter debug mode after next reset (only if jumper is also set) */
+/* write_mmcr_byte(SC520_RESCFG, 0x00); */
+
+ /* Crystal is 33.000MHz */
+ gd->bus_clk = 33000000;
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ init_sc520_dram();
+ return 0;
+}
+
+void show_boot_progress(int val)
+{
+ uchar led_mask;
+
+ led_mask = 0x00;
+
+ if (val < 0)
+ led_mask |= LED_ERR_BITMASK;
+
+ led_mask |= (uchar)(val & 0x001f);
+ outb(led_mask, LED_LATCH_ADDRESS);
+}
+
+
+int last_stage_init(void)
+{
+ int minor;
+ int major;
+
+ major = minor = 0;
+
+ printf("Serck Controls eNET\n");
+ printf("last_stage_init() at %08lx\n", (ulong)last_stage_init);
+
+ printf("autoscript => do_autoscript() @ 0x%08lx\n",
(ulong)do_autoscript);
+ printf("bdinfo => do_bdinfo() @ 0x%08lx\n",
(ulong)do_bdinfo);
+ printf("go => do_go() @ 0x%08lx\n",
(ulong)do_go);
+ printf("reset => do_reset() @ 0x%08lx\n",
(ulong)do_reset);
+ printf("bootm => do_bootm() @ 0x%08lx\n",
(ulong)do_bootm);
+ printf("boot => do_bootd() @ 0x%08lx\n",
(ulong)do_bootd);
+ printf("bootd => do_bootd() @ 0x%08lx\n",
(ulong)do_bootd);
+ printf("iminfo => do_iminfo() @ 0x%08lx\n",
(ulong)do_iminfo);
+/* printf("imls => do_imls() @ 0x%08lx\n",
(ulong)do_imls); */
+ printf("imls => do_imls() @ <undefined>\n");
+ printf("coninfo => do_coninfo() @ 0x%08lx\n",
(ulong)do_coninfo);
+ printf("itest => do_itest() @ 0x%08lx\n",
(ulong)do_itest);
+ printf("loads => do_load_serial() @ 0x%08lx\n",
(ulong)do_load_serial);
+ printf("loadb => do_load_serial_bin() @ 0x%08lx\n",
(ulong)do_load_serial_bin);
+ printf("loady => do_load_serial_bin() @ 0x%08lx\n",
(ulong)do_load_serial_bin);
+ printf("md => do_mem_md() @ 0x%08lx\n",
(ulong)do_mem_md);
+ printf("mm => do_mem_mm() @ 0x%08lx\n",
(ulong)do_mem_mm);
+ printf("nm => do_mem_nm() @ 0x%08lx\n",
(ulong)do_mem_nm);
+ printf("mw => do_mem_mw() @ 0x%08lx\n",
(ulong)do_mem_mw);
+ printf("cp => do_mem_cp() @ 0x%08lx\n",
(ulong)do_mem_cp);
+ printf("cmp => do_mem_cmp() @ 0x%08lx\n",
(ulong)do_mem_cmp);
+ printf("crc32 => do_mem_crc() @ 0x%08lx\n",
(ulong)do_mem_crc);
+ printf("base => do_mem_base() @ 0x%08lx\n",
(ulong)do_mem_base);
+ printf("loop => do_mem_loop() @ 0x%08lx\n",
(ulong)do_mem_loop);
+ printf("mtest => do_mem_mtest() @ 0x%08lx\n",
(ulong)do_mem_mtest);
+ printf("sleep => do_sleep() @ 0x%08lx\n",
(ulong)do_sleep);
+ printf("printenv => do_printenv() @ 0x%08lx\n",
(ulong)do_printenv);
+ printf("setenv => do_setenv() @ 0x%08lx\n",
(ulong)do_setenv);
+ printf("saveenv => do_saveenv() @ 0x%08lx\n",
(ulong)do_saveenv);
+ printf("run => do_run() @ 0x%08lx\n",
(ulong)do_run);
+ printf("imxtract => do_imgextract() @ 0x%08lx\n",
(ulong)do_imgextract);
+ printf("version => do_version() @ 0x%08lx\n",
(ulong)do_version);
+ printf("echo => do_echo() @ 0x%08lx\n",
(ulong)do_echo);
+ printf("help => do_help() @ 0x%08lx\n",
(ulong)do_help);
+ printf("? => do_help() @ 0x%08lx\n",
(ulong)do_help);
+
+
+ return 0;
+}
+
+
diff --git a/board/eNET/eNET_start.S b/board/eNET/eNET_start.S
new file mode 100644
index 0000000..124660c
--- /dev/null
+++ b/board/eNET/eNET_start.S
@@ -0,0 +1,224 @@
+/*
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB <[EMAIL PROTECTED]>.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <asm/ic/sc520_defs.h>
+
+#include "hardware_defs.h"
+
+sc520_cdp_registers:
+/*
+ * This is the MMCR configuration array - only change the values here if
+ * you are absolutely sure you know what you are doing
+ */
+/* size offset value */
+.word 0x0001 ; .word 0x0040 ; .long 0x00000000 /* SDRAM buffer control */
+.word 0x0001 ; .word 0x0c08 ; .long 0x00000001 /* GP Chip Select Recovery Time
*/
+.word 0x0001 ; .word 0x0c09 ; .long 0x00000007 /* GP Chip Select Pulse Width */
+.word 0x0001 ; .word 0x0c0a ; .long 0x00000000 /* GP Chip Select Offset */
+.word 0x0001 ; .word 0x0c0b ; .long 0x00000005 /* GP Read pulse width */
+.word 0x0001 ; .word 0x0c0c ; .long 0x00000001 /* GP Read offset */
+.word 0x0001 ; .word 0x0c0d ; .long 0x00000005 /* GP Write pulse width */
+.word 0x0001 ; .word 0x0c0e ; .long 0x00000001 /* GP Write offset */
+.word 0x0002 ; .word 0x0c30 ; .long 0x00000630 /* PIO15_PIO0 Data */
+.word 0x0002 ; .word 0x0c32 ; .long 0x00002000 /* PIO31_PIO16 Data */
+.word 0x0002 ; .word 0x0c2c ; .long 0x00002000 /* GPIO directionreg */
+.word 0x0002 ; .word 0x0c2a ; .long 0x000087b5 /* GPIO directionreg */
+.word 0x0002 ; .word 0x0c22 ; .long 0x00000dfe /* GPIO pin function 31-16 reg
*/
+.word 0x0002 ; .word 0x0c20 ; .long 0x0000200a /* GPIO pin function 15-0 reg */
+.word 0x0001 ; .word 0x0c24 ; .long 0x000000F8 /* Chip Select Pin Function
Select */
+.word 0x0004 ; .word 0x0090 ; .long 0x200713f8 /* PAR2 - Uart A (GPCS0,
0x013f8, 8 Bytes) */
+.word 0x0004 ; .word 0x0094 ; .long 0x2c0712f8 /* PAR3 - Uart B (GPCS3,
0x012f8, 8 Bytes) */
+.word 0x0004 ; .word 0x0098 ; .long 0x300711f8 /* PAR4 - Uart C (GPCS4,
0x011f8, 8 Bytes) */
+.word 0x0004 ; .word 0x009c ; .long 0x340710f8 /* PAR5 - Uart D (GPCS5,
0x010f8, 8 Bytes) */
+.word 0x0004 ; .word 0x00a0 ; .long 0xe3ffc000 /* PAR6 - SDRAM (0x00000000,
128MB) */
+.word 0x0004 ; .word 0x00a4 ; .long 0xaa3fd000 /* PAR7 - StrataFlash (ROMCS1,
0x10000000, 16MB) */
+.word 0x0004 ; .word 0x00a8 ; .long 0xca3fd100 /* PAR8 - StrataFlash (ROMCS2,
0x11000000, 16MB) */
+.word 0x0004 ; .word 0x00ac ; .long 0x4203d900 /* PAR9 - SRAM (GPCS0,
0x19000000, 1MB) */
+.word 0x0004 ; .word 0x00b0 ; .long 0x4e03d910 /* PAR10 -SRAM (GPCS3,
0x19100000, 1MB) */
+.word 0x0004 ; .word 0x00b4 ; .long 0x50018100 /* PAR11 -DP-RAM (GPCS4,
0x18100000, 4kB) */
+.word 0x0004 ; .word 0x00b8 ; .long 0x54020000 /* PAR12 -CFLASH1 (0x200000000,
4kB) */
+.word 0x0004 ; .word 0x00bc ; .long 0x5c020001 /* PAR13 -CFLASH2 (0x200010000,
4kB) */
+.word 0x0004 ; .word 0x00c0 ; .long 0x8bfff800 /* PAR14 - BOOTCS at
0x18000000 */
+.word 0x0004 ; .word 0x00c4 ; .long 0x38201000 /* PAR15 - LEDs etc (GPCS6,
0x1000, 20 Bytes */
+.word 0x0002 ; .word 0x0cb0 ; .long 0x00003333 /* Activate watchdog status
register step 1 */
+.word 0x0002 ; .word 0x0cb0 ; .long 0x0000cccc /* Activate watchdog status
register step 2 */
+.word 0x0002 ; .word 0x0cb0 ; .long 0x00000000 /* Disable Watchdog */
+.word 0x0000 ; .word 0x0000 ; .long 0x00000000 /* EOT */
+
+/* board early intialization */
+.globl early_board_init
+early_board_init:
+ movl $sc520_cdp_registers,%esi
+init_loop:
+ movl $0xfffef000,%edi /* MMCR base to edi */
+ movw (%esi), %bx /* load sizer to bx */
+ cmpw $0, %bx /* if sie is 0 we're done */
+ je done
+ xorl %edx,%edx
+ movw 2(%esi), %dx /* load MMCR offset to dx */
+ addl %edx, %edi /* add offset to base in edi */
+ movl 4(%esi), %eax /* load value in eax */
+ cmpw $1, %bx
+ je byte /* byte op? */
+ cmpw $2, %bx
+ je word /* word op? */
+ movl %eax, (%edi) /* must be long, then */
+ jmp next
+byte: movb %al,(%edi)
+ jmp next
+word: movw %ax,(%edi)
+next: addl $8, %esi /* advance esi */
+ jmp init_loop
+done:
+ /* The LEDs are now available */
+ movw $LED_LATCH_ADDRESS, %dx
+ movb $0x0f, %al
+ outb %al, %dx
+
+ /* Initialize 8259 master */
+# mov al, 78h ; Use int vectors 78h to 7fh.
+# mov dx, MPICICW2
+# out dx, al
+# jmp $+2
+# mov al, 24h ; IR2 and IR5 has a slave PIC.
+# out dx, al ; MPICICW3
+# jmp $+2
+# mov al, 01h ; Master, 8086 mode.
+# out dx, al ; MPICICW4
+# jmp $+2
+# mov al, 0ffh ; Mask interrupt of master PIC.
+# out dx, al ; MPICINTMSK
+# jmp $+2
+ movb $0x11, %al
+ movw $MPICICW1, %dx
+ outb %al, %dx
+ jmp .+2
+ movb $0x78, %al
+ movw $MPICICW2, %dx
+ outb %al, %dx
+ jmp .+2
+ movb $0x24, %al
+ out %al, %dx
+ jmp .+2
+ movb $0x01, %al
+ outb %al, %dx
+ jmp .+2
+ movb $0xff, %al
+ outb %al, %dx
+ jmp .+2
+
+ /* Initialize 8259 slave1 */
+# mov al, 11h ; Edge, slave 1, ICW4.
+# mov dx, S1PICICW1
+# out dx, al
+# jmp $+2
+# mov al, 70h ; Use int vectors 70h to 77h.
+# mov dx, S1PICICW2
+# out dx, al
+# jmp $+2
+# mov al, 02h ; Slave ID = 2.
+# out dx, al ; S1PICICW3
+# jmp $+2
+# mov al, 01h ; Enable device.
+# out dx, al ; S1PICICW4
+# jmp $+2
+# mov al, 0ffh ; Mask interrupt of slave PIC.
+# out dx, al ; S1PICINTMSK
+# jmp $+2
+ movb $0x11, %al
+ movw $S1PICICW1, %dx
+ outb %al, %dx
+ jmp .+2
+ movb $0x70, %al
+ movw $S1PICICW2, %dx
+ outb %al, %dx
+ jmp .+2
+ movb $0x02, %al
+ outb %al, %dx
+ jmp .+2
+ movb $0x01, %al
+ outb %al, %dx
+ jmp .+2
+ movb $0xff, %al
+ outb %al, %dx
+ jmp .+2
+
+ /* Initialize 8259 slave 2 */
+# mov al, 11h ; Edge, slave 2, ICW4.
+# mov dx, S2PICICW1
+# out dx, al
+# jmp $+2
+# mov al, 68h ; Use int vectors 68h to 6fh.
+# mov dx, S2PICICW2
+# out dx, al
+# jmp $+2
+# mov al, 05h ; Slave ID = 5.
+# out dx, al ; S2PICICW3
+# jmp $+2
+# mov al, 01h ; Enable Device.
+# out dx, al ; S2PICICW4
+# jmp $+2
+# mov al, 0ffh ; Mask interrupt of slave 2 PIC.
+# out dx, al ; S2PICINTMSK
+# jmp $+2
+ movb $0x11, %al
+ movw $S2PICICW1, %dx
+ outb %al, %dx
+ jmp .+2
+ movb $0x68, %al
+ movw $S2PICICW2, %dx
+ outb %al, %dx
+ jmp .+2
+ movb $0x05, %al
+ outb %al, %dx
+ jmp .+2
+ movb $0x01, %al
+ outb %al, %dx
+ jmp .+2
+ movb $0xff, %al
+ outb %al, %dx
+ jmp .+2
+
+
+ jmp *%ebp /* return to caller */
+
+.globl show_boot_progress_asm
+show_boot_progress_asm:
+
+ movb %al, %dl /* Create Working Copy */
+ andb $0x80, %dl /* Mask in only Error bit */
+ shrb $0x02, %dl /* Shift Error bit to Error LED */
+ andb $0x0f, %al /* Mask out 'Error' bit */
+ orb %dl, %al /* Mask in ERR LED */
+ movw $LED_LATCH_ADDRESS, %dx
+ outb %al, %dx
+
+ jmp *%ebp /* return to caller */
+
+
+.globl cpu_halt_asm
+cpu_halt_asm:
+ movb $0x0f, %al
+ movw $LED_LATCH_ADDRESS, %dx
+ outb %al, %dx
+ hlt
+ jmp cpu_halt_asm
diff --git a/board/eNET/eNET_start16.S b/board/eNET/eNET_start16.S
new file mode 100644
index 0000000..e0d2ebb
--- /dev/null
+++ b/board/eNET/eNET_start16.S
@@ -0,0 +1,91 @@
+/*
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB <[EMAIL PROTECTED]>.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * 16bit initialization code.
+ * This code have to map the area of the boot flash
+ * that is used by U-boot to its final destination.
+ */
+
+#include "hardware.h"
+
+.text
+.section .start16, "ax"
+.code16
+.globl board_init16
+board_init16:
+ /* Alias MMCR to 0xdf000 */
+ movw $0xfffc, %dx
+ movl $0x800df0cb, %eax
+ outl %eax, %dx
+
+ /* Set ds to point to MMCR alias */
+ movw $0xdf00, %ax
+ movw %ax, %ds
+
+ /* Map the entire flash at 0x38000000
+ * (with BOOTCS and PAR14, use 0xabfff800 for ROMCS1) */
+ movl $0xc0, %edi
+ movl $0x8bfff800, %eax
+ movl %eax, (%di)
+
+ /* Disable SDRAM write buffer */
+ movw $0x40,%di
+ xorw %ax,%ax
+ movb %al, (%di)
+
+#; turn off the cache
+# mov eax, cr0
+# or eax,060000000h
+# mov cr0, eax
+# wbinvd ; flush the cache
+
+
+ /* Disabe MMCR alias */
+ movw $0xfffc, %dx
+ movl $0x000000cb, %eax
+ outl %eax, %dx
+
+ /* the return address is stored in bp */
+ jmp *%bp
+
+.section .bios, "ax"
+.code16
+.globl realmode_reset
+realmode_reset:
+ /* Alias MMCR to 0xdf000 */
+ movw $0xfffc, %dx
+ movl $0x800df0cb, %eax
+ outl %eax, %dx
+
+ /* Set ds to point to MMCR alias */
+ movw $0xdf00, %ax
+ movw %ax, %ds
+
+ /* issue software reset thorugh MMCR */
+ movl $0xd72, %edi
+ movb $0x01, %al
+ movb %al, (%di)
+
+1: hlt
+ jmp 1
diff --git a/board/eNET/flash.c b/board/eNET/flash.c
new file mode 100644
index 0000000..168477b
--- /dev/null
+++ b/board/eNET/flash.c
@@ -0,0 +1,641 @@
+/*
+ * (C) Copyright 2002, 2003
+ * Daniel Engström, Omicron Ceti AB, [EMAIL PROTECTED]
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <[EMAIL PROTECTED]>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <pci.h>
+#include <asm/ic/sc520.h>
+
+#define PROBE_BUFFER_SIZE 1024
+static unsigned char buffer[PROBE_BUFFER_SIZE];
+
+#define SC520_MAX_FLASH_BANKS 3
+#define SC520_FLASH_BANK0_BASE 0x38000000 /* BOOTCS */
+#define SC520_FLASH_BANK1_BASE 0x10ffffff /* ROMCS0 */
+#define SC520_FLASH_BANK2_BASE 0x11ffffff /* ROMCS1 */
+#define SC520_FLASH_BANKSIZE 0x1000000
+
+#define AMD29LV016B_SIZE 0x80000
+#define AMD29LV016B_SECTORS 32
+
+flash_info_t flash_info[SC520_MAX_FLASH_BANKS];
+
+#define READY 1
+#define ERR 2
+#define TMO 4
+
+/*-----------------------------------------------------------------------
+ */
+
+
+static u32 _probe_flash(u32 addr, u32 bw, int il)
+{
+ u32 result=0;
+
+ /* First do an unlock cycle for the benefit of
+ * devices that need it */
+
+ switch (bw) {
+
+ case 1:
+ *(volatile u8*)(addr+0x5555) = 0xaa;
+ *(volatile u8*)(addr+0x2aaa) = 0x55;
+ *(volatile u8*)(addr+0x5555) = 0x90;
+
+ /* Read vendor */
+ result = *(volatile u8*)addr;
+ result <<= 16;
+
+ /* Read device */
+ result |= *(volatile u8*)(addr+2);
+
+ /* Return device to data mode */
+ *(volatile u8*)addr = 0xff;
+ *(volatile u8*)(addr+0x5555), 0xf0;
+ break;
+
+ case 2:
+ *(volatile u16*)(addr+0xaaaa) = 0xaaaa;
+ *(volatile u16*)(addr+0x5554) = 0x5555;
+
+ /* Issue identification command */
+ if (il == 2) {
+ *(volatile u16*)(addr+0xaaaa) = 0x9090;
+
+ /* Read vendor */
+ result = *(volatile u8*)addr;
+ result <<= 16;
+
+ /* Read device */
+ result |= *(volatile u8*)(addr+2);
+
+ /* Return device to data mode */
+ *(volatile u16*)addr = 0xffff;
+ *(volatile u16*)(addr+0xaaaa), 0xf0f0;
+
+ } else {
+ *(volatile u8*)(addr+0xaaaa) = 0x90;
+ /* Read vendor */
+ result = *(volatile u16*)addr;
+ result <<= 16;
+
+ /* Read device */
+ result |= *(volatile u16*)(addr+2);
+
+ /* Return device to data mode */
+ *(volatile u8*)addr = 0xff;
+ *(volatile u8*)(addr+0xaaaa), 0xf0;
+ }
+
+ break;
+
+ case 4:
+ *(volatile u32*)(addr+0x5554) = 0xaaaaaaaa;
+ *(volatile u32*)(addr+0xaaa8) = 0x55555555;
+
+ switch (il) {
+ case 1:
+ /* Issue identification command */
+ *(volatile u8*)(addr+0x5554) = 0x90;
+
+ /* Read vendor */
+ result = *(volatile u16*)addr;
+ result <<= 16;
+
+ /* Read device */
+ result |= *(volatile u16*)(addr+4);
+
+ /* Return device to data mode */
+ *(volatile u8*)addr = 0xff;
+ *(volatile u8*)(addr+0x5554), 0xf0;
+ break;
+
+ case 2:
+ /* Issue identification command */
+ *(volatile u32*)(addr + 0x5554) = 0x00900090;
+
+ /* Read vendor */
+ result = *(volatile u16*)addr;
+ result <<= 16;
+
+ /* Read device */
+ result |= *(volatile u16*)(addr+4);
+
+ /* Return device to data mode */
+ *(volatile u32*)addr = 0x00ff00ff;
+ *(volatile u32*)(addr+0x5554), 0x00f000f0;
+ break;
+
+ case 4:
+ /* Issue identification command */
+ *(volatile u32*)(addr+0x5554) = 0x90909090;
+
+ /* Read vendor */
+ result = *(volatile u8*)addr;
+ result <<= 16;
+
+ /* Read device */
+ result |= *(volatile u8*)(addr+4);
+
+ /* Return device to data mode */
+ *(volatile u32*)addr = 0xffffffff;
+ *(volatile u32*)(addr+0x5554), 0xf0f0f0f0;
+ break;
+ }
+ break;
+ }
+
+
+ return result;
+}
+
+extern int _probe_flash_end;
+asm ("_probe_flash_end:\n"
+ ".long 0\n");
+
+static int identify_flash(unsigned address, int width)
+{
+ int is;
+ int device;
+ int vendor;
+ int size;
+ unsigned res;
+
+ u32 (*_probe_flash_ptr)(u32 a, u32 bw, int il);
+
+ size = (unsigned)&_probe_flash_end - (unsigned)_probe_flash;
+
+ if (size > PROBE_BUFFER_SIZE) {
+ printf("_probe_flash() routine too large (%d) %p - %p\n",
+ size, &_probe_flash_end, _probe_flash);
+ return 0;
+ }
+
+ memcpy(buffer, _probe_flash, size);
+ _probe_flash_ptr = (void*)buffer;
+
+ is = disable_interrupts();
+ res = _probe_flash_ptr(address, width, 1);
+ if (is) {
+ enable_interrupts();
+ }
+
+
+ vendor = res >> 16;
+ device = res & 0xffff;
+
+
+ return res;
+}
+
+ulong flash_init(void)
+{
+ int i, j;
+ ulong size = 0;
+
+ printf("flash_init ()");
+
+ printf("Test %d Test %08x\n", 2, 1024);
+
+ for (i = 0; i < SC520_MAX_FLASH_BANKS; i++) {
+ unsigned id;
+ ulong flashbase = 0;
+ int sectsize = 0;
+
+ memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+ switch (i) {
+ case 0:
+ flashbase = SC520_FLASH_BANK0_BASE;
+ break;
+ case 1:
+ flashbase = SC520_FLASH_BANK1_BASE;
+ break;
+ case 2:
+ flashbase = SC520_FLASH_BANK2_BASE;
+ break;
+ default:
+ panic("configured too many flash banks!\n");
+ }
+
+ id = identify_flash(flashbase, 4);
+ switch (id & 0x00ff00ff) {
+ case 0x000100c8:
+ /* 29LV016B/29LV017B */
+ flash_info[i].flash_id =
+ (AMD_MANUFACT & FLASH_VENDMASK) |
+ (AMD_ID_LV016B & FLASH_TYPEMASK);
+
+ flash_info[i].size = AMD29LV016B_SIZE*4;
+ flash_info[i].sector_count = AMD29LV016B_SECTORS;
+ sectsize = (AMD29LV016B_SIZE*4)/AMD29LV016B_SECTORS;
+ printf("Bank %d: 4 x AMD 29LV017B\n", i);
+ break;
+
+
+ default:
+ printf("Bank %d have unknown flash %08x\n", i, id);
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ continue;
+ }
+
+ for (j = 0; j < flash_info[i].sector_count; j++) {
+ flash_info[i].start[j] = flashbase + j * sectsize;
+ }
+ size += flash_info[i].size;
+
+ flash_protect(FLAG_PROTECT_CLEAR,
+ flash_info[i].start[0],
+ flash_info[i].start[0] + flash_info[i].size - 1,
+ &flash_info[i]);
+ }
+
+ /*
+ * Protect monitor and environment sectors
+ */
+ flash_protect(FLAG_PROTECT_SET,
+ i386boot_start,
+ i386boot_end,
+ &flash_info[0]);
+#ifdef CFG_ENV_ADDR
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+ &flash_info[0]);
+#endif
+ return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info(flash_info_t *info)
+{
+ int i;
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+
+ case (AMD_MANUFACT & FLASH_VENDMASK):
+ printf("AMD: ");
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case (AMD_ID_LV016B & FLASH_TYPEMASK):
+ printf("4x AMD29LV017B (4x16Mbit)\n");
+ break;
+ default:
+ printf("Unknown Chip Type\n");
+ goto done;
+ break;
+ }
+
+ break;
+ default:
+ printf("Unknown Vendor ");
+ break;
+ }
+
+
+ printf(" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf(" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; i++) {
+ if ((i % 5) == 0) {
+ printf ("\n ");
+ }
+ printf (" %08lX%s", info->start[i],
+ info->protect[i] ? " (RO)" : " ");
+ }
+ printf ("\n");
+
+done: ;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+/* this needs to be inlined, the SWTMRMMILLI register is reset by each read */
+#define __udelay(delay) \
+{ \
+ unsigned micro; \
+ unsigned milli=0; \
+ \
+ micro = *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); \
+ \
+ for (;;) { \
+ \
+ milli += *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); \
+ micro = *(volatile u16*)(0xfffef000+SC520_SWTMRMICRO); \
+ \
+ if ((delay) <= (micro + (milli * 1000))) { \
+ break; \
+ } \
+ } \
+} while (0)
+
+static u32 _amd_erase_flash(u32 addr, u32 sector)
+{
+ unsigned elapsed;
+
+ /* Issue erase */
+ *(volatile u32*)(addr + 0x5554) = 0xAAAAAAAA;
+ *(volatile u32*)(addr + 0xaaa8) = 0x55555555;
+ *(volatile u32*)(addr + 0x5554) = 0x80808080;
+ /* And one unlock */
+ *(volatile u32*)(addr + 0x5554) = 0xAAAAAAAA;
+ *(volatile u32*)(addr + 0xaaa8) = 0x55555555;
+ /* Sector erase command comes last */
+ *(volatile u32*)(addr + sector) = 0x30303030;
+
+ elapsed = *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); /* dummy read
*/
+ elapsed = 0;
+ __udelay(50);
+ while (((*(volatile u32*)(addr + sector)) & 0x80808080) != 0x80808080) {
+
+ elapsed += *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI);
+ if (elapsed > ((CFG_FLASH_ERASE_TOUT/CFG_HZ) * 1000)) {
+ *(volatile u32*)(addr) = 0xf0f0f0f0;
+ return 1;
+ }
+ }
+
+ *(volatile u32*)(addr) = 0xf0f0f0f0;
+
+ return 0;
+}
+
+extern int _amd_erase_flash_end;
+asm ("_amd_erase_flash_end:\n"
+ ".long 0\n");
+
+int flash_erase(flash_info_t *info, int s_first, int s_last)
+{
+ u32 (*_erase_flash_ptr)(u32 a, u32 so);
+ int prot;
+ int sect;
+ unsigned size;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf("- missing\n");
+ } else {
+ printf("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if ((info->flash_id & FLASH_VENDMASK) == (AMD_MANUFACT &
FLASH_VENDMASK)) {
+ size = (unsigned)&_amd_erase_flash_end -
(unsigned)_amd_erase_flash;
+
+ if (size > PROBE_BUFFER_SIZE) {
+ printf("_amd_erase_flash() routine too large (%d) %p -
%p\n",
+ size, &_amd_erase_flash_end, _amd_erase_flash);
+ return 0;
+ }
+
+ memcpy(buffer, _amd_erase_flash, size);
+ _erase_flash_ptr = (void*)buffer;
+
+ } else {
+ printf ("Can't erase unknown flash type - aborted\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be
erased!\n", prot);
+ } else {
+ printf ("\n");
+ }
+
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+
+ if (info->protect[sect] == 0) { /* not protected */
+ int res;
+ int flag;
+
+ /* Disable interrupts which might cause a timeout here
*/
+ flag = disable_interrupts();
+
+ res = _erase_flash_ptr(info->start[0],
info->start[sect]-info->start[0]);
+
+ /* re-enable interrupts if necessary */
+ if (flag) {
+ enable_interrupts();
+ }
+
+
+ if (res) {
+ printf("Erase timed out, sector %d\n", sect);
+ return res;
+ }
+
+ putc('.');
+ }
+ }
+
+
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int _amd_write_word(unsigned start, unsigned dest, unsigned data)
+{
+ volatile u32 *addr2 = (u32*)start;
+ volatile u32 *dest2 = (u32*)dest;
+ volatile u32 *data2 = (u32*)&data;
+ unsigned elapsed;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((volatile u32*)dest) & (u32)data) != (u32)data) {
+ return 2;
+ }
+
+ addr2[0x5554] = 0xAAAAAAAA;
+ addr2[0xaaa8] = 0x55555555;
+ addr2[0x5554] = 0xA0A0A0A0;
+
+ dest2[0] = data;
+
+ elapsed = *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); /* dummy read
*/
+ elapsed = 0;
+
+ /* data polling for D7 */
+ while ((dest2[0] & 0x80808080) != (data2[0] & 0x80808080)) {
+ elapsed += *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI);
+ if (elapsed > ((CFG_FLASH_WRITE_TOUT/CFG_HZ) * 1000)) {
+ addr2[0] = 0xf0f0f0f0;
+ return 1;
+ }
+ }
+
+
+ addr2[0] = 0xf0f0f0f0;
+
+ return 0;
+}
+
+extern int _amd_write_word_end;
+asm ("_amd_write_word_end:\n"
+ ".long 0\n");
+
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 3 - Unsupported flash type
+ */
+
+int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+ int flag;
+ u32 (*_write_word_ptr)(unsigned start, unsigned dest, unsigned data);
+ unsigned size;
+
+ if ((info->flash_id & FLASH_VENDMASK) == (AMD_MANUFACT &
FLASH_VENDMASK)) {
+ size = (unsigned)&_amd_write_word_end -
(unsigned)_amd_write_word;
+
+ if (size > PROBE_BUFFER_SIZE) {
+ printf("_amd_write_word() routine too large (%d) %p -
%p\n",
+ size, &_amd_write_word_end, _amd_write_word);
+ return 0;
+ }
+
+ memcpy(buffer, _amd_write_word, size);
+ _write_word_ptr = (void*)buffer;
+
+ } else {
+ printf ("Can't program unknown flash type - aborted\n");
+ return 3;
+ }
+
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data |= (*(uchar *)cp) << (8*i);
+ }
+ for (; i<4 && cnt>0; ++i) {
+ data |= *src++ << (8*i);
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data |= (*(uchar *)cp) << (8*i);
+ }
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ rc = _write_word_ptr(info->start[0], wp, data);
+
+ /* re-enable interrupts if necessary */
+ if (flag) {
+ enable_interrupts();
+ }
+ if (rc != 0) {
+ return rc;
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+
+ for (i=0; i<4; ++i) {
+ data |= *src++ << (8*i);
+ }
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ rc = _write_word_ptr(info->start[0], wp, data);
+
+ /* re-enable interrupts if necessary */
+ if (flag) {
+ enable_interrupts();
+ }
+ if (rc != 0) {
+ return rc;
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return 0;
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ data |= *src++ << (8*i);
+ --cnt;
+ }
+
+ for (; i<4; ++i, ++cp) {
+ data |= (*(uchar *)cp) << (8*i);
+ }
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ rc = _write_word_ptr(info->start[0], wp, data);
+
+ /* re-enable interrupts if necessary */
+ if (flag) {
+ enable_interrupts();
+ }
+
+ return rc;
+
+}
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
