Dear Bartlomiej Sieka, In message <[EMAIL PROTECTED]> you wrote: > > > I see. Maybe we should call the variable "updatefile" or similar, > > then? > > How about "au_file"? "updatefile" suffers from similarity to the > commonly used (although not documented) "update" env. variable. But I'm > fine either way, just let me know what you prefer.
I would use "updatefile", but if you prefer "au_file" (and nobody else comes up with comments or better suggestions) that's fine with me, too. > > So you will either have to add some more #ifdef's, or think what > > could happen if the VFD (Vacuum Fluorescent Display) initialization > > code runs first - I would not expect any negative impact? > > I don't think there will be any negative impact per se, the update > procedure will just start a bit later (the time needed to display the > bitmap on the FVD). Actually that would prebably be wanted, as the end user would see that the system was powered on [and actually we don't really have to care much, as the TRAB board has reached EOL officially]. > Will move au_tftp() call till after the VFD stuff. Thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] It all seemed, he thought, to be rather a lot of trouble to go to just sharpen a razor blade. - Terry Pratchett, _The Light Fantastic_ _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
