> On Thu, 4 Sep 2008 10:09:57 -0500 Scott wrote:
>
> On Thu, Sep 04, 2008 at 02:04:42PM +0200, Pedro Luis D. L. wrote:
>> It seems to me that U-boot is trying to boot from RAMDisk instead of booting
>> the kernel, but I'm not sure.
>> The same kernel is working properly on a phytec board and 1.2.0 U-boot,
>> so it's not a problem with jffs2 support within the kernel.
>> Any hint how to boot from jffs2 filesystem? The example in U-Boot
>> documentation doesn't use oftree and so,
>> bootm ${kernel_addr} is used, but TQM5200 requieres FDT description to boot
>> linux as you'll know.
>> Maybe should I compile the U-boot using some CONFIG_ parameter?
>
> Sounds like maybe you're trying to pass the FDT address as the second
> bootm parameter? It needs to be the third parameter, and you pass - as
> the second parameter if there's no initrd.
>
I've already tried with:
- bootm ${kernel_addr} - ${fdt_addr}
- bootm ${kernel_addr} ${fdt_addr}
- bootm ${kernel_addr} ${jffs2_addr} ${fdt_addr}
- bootm ${kernel_addr} ${fdt_addr} ${jffs2_addr}
And always with the same result...
Pedro.
> -Scott
_________________________________________________________________
¿Sigue el calor? Consulta MSN El tiempo
http://eltiempo.es.msn.com/
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
