Dear Guennadi Liakhovetski, In message <[EMAIL PROTECTED]> you wrote: > What follows is a patch series to support NAND environment under Linux, > including bad blocks. In principle, this is just one logical change, but > it is a big one... So I split it into 6 smaller patches, which should be > easier to review. Tested with and without redundant environment, with an > injected bad block, crossing block border, read and write.
I just tried building for older kernels - it doesn't work: -> make env MTD_VERSION=old make -C tools/env all MTD_VERSION=old || exit 1 make[1]: Entering directory `/home/wd/git/u-boot/tmp/tools/env' ppc_8xx-gcc -Wall -DUSE_HOSTCC -I/home/wd/git/u-boot/tmp/include -DMTD_OLD crc32.c fw_env.c fw_env_main.c -o fw_printenv In file included from /home/wd/git/u-boot/tmp/include/linux/mtd/mtd.h:13, from fw_env.c:36: /home/wd/git/u-boot/tmp/include/linux/mtd/mtd-abi.h:15: error: parse error before "uint32_t" /home/wd/git/u-boot/tmp/include/linux/mtd/mtd-abi.h:15: warning: no semicolon at end of struct or union /home/wd/git/u-boot/tmp/include/linux/mtd/mtd-abi.h:16: warning: type defaults to `int' in declaration of `length' /home/wd/git/u-boot/tmp/include/linux/mtd/mtd-abi.h:16: warning: data definition has no type or storage class /home/wd/git/u-boot/tmp/include/linux/mtd/mtd-abi.h:20: error: parse error before "uint32_t" /home/wd/git/u-boot/tmp/include/linux/mtd/mtd-abi.h:20: warning: no semicolon at end of struct or union /home/wd/git/u-boot/tmp/include/linux/mtd/mtd-abi.h:21: warning: type defaults to `int' in declaration of `length' /home/wd/git/u-boot/tmp/include/linux/mtd/mtd-abi.h:21: warning: data definition has no type or storage class /home/wd/git/u-boot/tmp/include/linux/mtd/mtd-abi.h:23: error: parse error before '}' token /home/wd/git/u-boot/tmp/include/linux/mtd/mtd-abi.h:57: error: parse error before "uint8_t" /home/wd/git/u-boot/tmp/include/linux/mtd/mtd-abi.h:57: warning: no semicolon at end of struct or union /home/wd/git/u-boot/tmp/include/linux/mtd/mtd-abi.h:58: warning: type defaults to `int' in declaration of `flags' /home/wd/git/u-boot/tmp/include/linux/mtd/mtd-abi.h:58: warning: data definition has no type or storage class /home/wd/git/u-boot/tmp/include/linux/mtd/mtd-abi.h:59: error: parse error before "size" /home/wd/git/u-boot/tmp/include/linux/mtd/mtd-abi.h:59: warning: type defaults to `int' in declaration of `size' /home/wd/git/u-boot/tmp/include/linux/mtd/mtd-abi.h:59: warning: data definition has no type or storage class /home/wd/git/u-boot/tmp/include/linux/mtd/mtd-abi.h:60: error: parse error before "erasesize" /home/wd/git/u-boot/tmp/include/linux/mtd/mtd-abi.h:60: warning: type defaults to `int' in declaration of `erasesize' /home/wd/git/u-boot/tmp/include/linux/mtd/mtd-abi.h:60: warning: data definition has no type or storage class /home/wd/git/u-boot/tmp/include/linux/mtd/mtd-abi.h:61: error: parse error before "writesize" /home/wd/git/u-boot/tmp/include/linux/mtd/mtd-abi.h:61: warning: type defaults to `int' in declaration of `writesize' /home/wd/git/u-boot/tmp/include/linux/mtd/mtd-abi.h:61: warning: data definition has no type or storage class /home/wd/git/u-boot/tmp/include/linux/mtd/mtd-abi.h:62: error: parse error before "oobsize" /home/wd/git/u-boot/tmp/include/linux/mtd/mtd-abi.h:62: warning: type defaults to `int' in declaration of `oobsize' /home/wd/git/u-boot/tmp/include/linux/mtd/mtd-abi.h:62: warning: data definition has no type or storage class /home/wd/git/u-boot/tmp/include/linux/mtd/mtd-abi.h:65: error: parse error before "ecctype" /home/wd/git/u-boot/tmp/include/linux/mtd/mtd-abi.h:65: warning: type defaults to `int' in declaration of `ecctype' /home/wd/git/u-boot/tmp/include/linux/mtd/mtd-abi.h:65: warning: data definition has no type or storage class /home/wd/git/u-boot/tmp/include/linux/mtd/mtd-abi.h:66: error: parse error before "eccsize" /home/wd/git/u-boot/tmp/include/linux/mtd/mtd-abi.h:66: warning: type defaults to `int' in declaration of `eccsize' ... etc. etc. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] Two wrongs don't make a right, but three rights make a left. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot