Andrew Dyer wrote: > dm9000 has code to detect and initialize external phy parts, but later > on in the code the part is forced to use the internal phy > unconditionally. Remove the unused/untested code. > > change the GPIO initialization so that only the GPIO used as an > internal phy reset (hardwired in the chip) is set as an output. The > remaining GPIO need to be handled by board specific code to prevent > possible drive conflicts. Set as inputs for safety. > > replace a few magic numbers with defines > > Signed-off-by: Andrew Dyer <[EMAIL PROTECTED]> > --- Applied to net repo. Thanks for clearing out the cruft.
regards, Ben _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
