Peter Tyser wrote: > Hi Ben, > > On Tue, 2008-08-26 at 09:31 -0700, Ben Warren wrote: > >> Hi Peter, >> >> Peter Tyser wrote: >> >>> cmd_net.c command descriptions were updated to describe the optional >>> hostIPaddr argument. The dhcp command help message was also updated >>> to more closely reflect the other commands in cmd_net.c >>> >>> Signed-off-by: Peter Tyser <[EMAIL PROTECTED]> >>> --- >>> >>> >> I'm too lazy to check if this is different from the patch that you sent >> previously (8/13 or so). I imagine you want this one applied and the >> other discarded? >> > > The content of this patch is identical to the previous patch sent on > 8/13. However, the email on 8/13's title included "[RFC]" and in it I > made the following comment: > > "Not sure if "boot" is the proper word to use in the command definitions > since the downloaded images are only booted if "autostart=yes", and > the majority of board configs don't have autostart set to yes. > I'd vote for changing the descriptions to "load image via...". > If a new, more granular bootm command is in the works, > it seems like even less people will autoboot an image > directly before doing some additional bootm commands to prep > for booting an OS. Do others have an opinion?" > > No one seemed to bite as far as changing the wording of the commands, so > I re-sent the same patch without the [RFC] and cleaned up the commit > message to make it a formal patch. So you're right, this patch should > be applied and the previous one on 8/13 discarded. > Good deal. I'm hoping to get a few hours tonight to catch up.
regards, Ben _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
