You must use a FQDN. If you are only using a HOST name then you have to have the correct search order suffixes set up in his TCP/IP configuration.
-----Original Message----- From: twsocket-boun...@elists.org [mailto:twsocket-boun...@elists.org] On Behalf Of YAMACO Software Sent: Monday, February 22, 2010 11:11 AM To: twsocket@elists.org Subject: [twsocket] URL translation Hello to all, one of my customers has following problem: if he uses an IP address in URL (HTTPCli), connection to the server is OK. Nevertheless while using valid server name instead IP address (for example municipality1), connection is not possible. Does not know anybody what is it caused by and how to solve it ? Thanks in advance. With regards Karel Ing. Karel Janeček, MBA ================================ = YAMACO Software = aplikační software, softwarové služby = Prostějovičky 79, 798 03 Plumlov, Czech Republic = IČ 484 63 850, DIČ CZ6612301300 = tel./fax: +420 582 393 605 = tel.: +420 731 616 511 = http://www.yamaco.cz = HelpDesk: http://helpdesk.yamaco.cz = LinkedIn: http://www.linkedin.com/in/yamaco = Skype: yamaco.software = ISDS: ebbd5wr =============================== -- To unsubscribe or change your settings for TWSocket mailing list please goto http://lists.elists.org/cgi-bin/mailman/listinfo/twsocket Visit our website at http://www.overbyte.be -- To unsubscribe or change your settings for TWSocket mailing list please goto http://lists.elists.org/cgi-bin/mailman/listinfo/twsocket Visit our website at http://www.overbyte.be
