Hello Arno,
Thank you for your explanations.
But all combinations of protocols and ports doesn't work with this ftps
server.
What do you means with "all in one methods" in :
"this type requires the AUTH command being issued, if you do not use the
"all in one methods".
Is it one parameter of TSslFtpClient ?
I have tried another component (Chilkat Ftp), and I have the same result as
with Ics component.
I can only connect this ftp with FileZilla, when I set the port to 990 and
the protocol to "FTPES : Ftp over explicit TSL/SSL".
Thank you for your help !
René Puyhaubert
2009/11/3 Arno Garrels <arno.garr...@gmx.de>
> Hello René,
>
> At first, TSslFtpClient supports all possible SSL/TLS protocols.
> I guess you are just mixing them up as I mix them up all the time,
> so welcome in the club!
>
> > FTPES : Ftp over explicit TSL/SSL; port 990
>
> You probably mean _implicit_ TLS/SSL; port 990.
>
> In the demo select SSL Type "sslTypeImplicit", and SSL Port 990.
> With implicit TLS/SSL the control connection is initially
> established as a secure SSL connection, hence command
> Auth will fail, this command is only required with explicit SSL.
>
> Select SSL Type "sslTypeAuthTls" or "sslTypeAuthSsl" for an
> explicit TLS/SSL connection, this type requires the AUTH command
> being issued, if you do not use the "all in one methods".
> Note that only "sslTypeAuthTls" is a RFC FTP SSL extension,
> "sslTypeAuthSsl" is there for compatibility with some old servers
> only. With explicit SSL/TLS ("sslTypeAuthTls" or "sslTypeAuthSsl")
> the control connection starts non-secured and can be switched into
> a secure connection by issuing the Auth command.
>
> --
> Arno Garrels
>
>
>
>
> René Puyhaubert wrote:
> > Hi,
> >
> > I want to connect to a secure ftp, with Ics component : TsslFtpClient
> > I have tested this connexion with demo program : OverbyteIcsFtpTst1
> > With any protocol ssl used, I have a connexion error at the Connect
> > command.
> > For example, with SsltypeAuthSsl, error is :
> >> AUTH SSL
> > < 534 AUTH command is disabled.
> > Request 5 Done.
> > StatusCode = 534
> > LastResponse was : '534 AUTH command is disabled.'
> > Error = 534 (534 AUTH command is disabled.)
> > Command Failure
> >
> > I can connect with FileZilla with parameters :
> >
> > FTPES : Ftp over explicit TSL/SSL; port 990
> >
> > I have not this protocol with Ics.
> > Is it possible to connect to this ftp server with Ics component :
> > TSslFtpClient ?
> >
> > Thank you for your help ...
> >
> > René Puyhaubert
> --
> To unsubscribe or change your settings for TWSocket mailing list
> please goto http://lists.elists.org/cgi-bin/mailman/listinfo/twsocket
> Visit our website at http://www.overbyte.be
>
--
To unsubscribe or change your settings for TWSocket mailing list
please goto http://lists.elists.org/cgi-bin/mailman/listinfo/twsocket
Visit our website at http://www.overbyte.be
