> Message-based component are 100% OK in a console mode application. There are > a lot of console mode > samples delivered with ICS (at least written in Delphi). Start looking by the > most recent which are > always the best.
I want to step into the SmtpProt.pas and trace the variables value to see what goes wrong. However in the Pascal unit the "Watch" and "Debug - Inspect" features of the C++ Builder IDE are not workable. Is that a limitation of C++ Builder to debug Pascal source, or there are some settings to allow to do so? I find there is a ConApp.pas in ICS source that features message loop. Can I make a C++ Builder console application to start with it? If positive, would anyone kindly advise how? The C++ Builder's Console Wizard only allows to specify 'C' or "C++" source to start with. The above questions should be posted to Borland's newgroup, but I receive no response after doing so and therefore have a try here. Thank you for your patience. Best regards, Patrick -- To unsubscribe or change your settings for TWSocket mailing list please goto http://www.elists.org/mailman/listinfo/twsocket Visit our website at http://www.overbyte.be
