I misunderstood your intent, because your previous message suggested
that you were trying to connect to port 5901 (Display :1). If you need
to connect to Display :1001, then do:
/opt/TurboVNC/bin/vncviewer -loglevel 110 -extssh -via
uek8desktop01 localhost:1001
or
/opt/TurboVNC/bin/vncviewer -loglevel 110 -extssh -via
uek8desktop01 localhost::6901
On 12/7/21 8:06 AM, Stephen Carville wrote:
Sorry it took so long to get back to you.
The first command does not work possibly because the display requested
(1) does not match the display expected (1001)
The second one, however, does work:
libjawt.so path:
/usr/lib/jvm/java-1.8.0-openjdk-1.8.0.312.b07-2.el8_5.x86_64/jre/lib/amd64
Log setting: 110
main: start called
Tunnel: SSH command line: /usr/bin/ssh -f -L 38161:localhost:6901
uek8desktop01 sleep 20
CConn: connected to host localhost port 38161
CConnection: reading protocol version (repeats 743 times)
CConnection: Server supports RFB protocol version 3.8
CConnection: Using RFB protocol version 3.8
CConnection: processing security types message
CConnection: Server offers security type None(1)
CConnection: Server offers security type Tight(16)
CConnection: Choosing security type Tight(16)
CConnection: processing security message
Tight: Choosing security type None(1)
CConnection: processing security result message (repeats 1411 times)
CConnection: Authentication success!
CConnection: reading server initialisation
CConnection: initialisation done
DesktopWindow: GraphicsDevice supports HW acceleration.
PlatformPixelBuffer: Native pixel format is depth 24 (32bpp)
little-endian rgb888
PlatformPixelBuffer: Native pixel format is depth 24 (32bpp)
little-endian rgb888
CConn: Using pixel format depth 24 (32bpp) little-endian rgb888
CConn: Requesting Tight encoding
CConn: Screen 0 work area: 0, 33 1920 x 1134
CConn: Spanned work area: 0, 33 1920 x 1134
Viewport: Set geometry to 0, 33 1920 x 1134
CMsgReaderV3: Server supports GII version 1
CConn: Enabling GII
ScreenSet: LAYOUT RECEIVED:
ScreenSet: 64 (0x40): 1912x1083+0+0 (flags 0x0)
ScreenSet: LAYOUT SENT:
ScreenSet: 64 (0x40): 1912x1083+0+0 (flags 0x0)
CConn: Enabling continuous updates
ScreenSet: LAYOUT RECEIVED:
ScreenSet: 64 (0x40): 1912x1083+0+0 (flags 0x0)
TurboVNC Helper: Disabling X11 full-screen mode for window 0x03800027
No extended input devices.
On Tuesday, November 30, 2021 at 9:59:29 AM UTC-8 DRC wrote:
Try
/opt/TurboVNC/bin/vncviewer -loglevel 110 -extssh -via
uek8desktop01 localhost:1
or
/opt/TurboVNC/bin/vncviewer -loglevel 110 -extssh -via
uek8desktop01 localhost::5901
You have to use two colons if you are specifying a TCP port rather
than
a display number.
DRC
On 11/14/21 9:03 AM, Stephen Carville wrote:
> /opt/TurboVNC/bin/vncviewer -loglevel 110 -extssh -via
uek8desktop01
> localhost:5901
--
You received this message because you are subscribed to the Google
Groups "TurboVNC User Discussion/Support" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to turbovnc-users+unsubscr...@googlegroups.com
<mailto:turbovnc-users+unsubscr...@googlegroups.com>.
To view this discussion on the web visit
https://groups.google.com/d/msgid/turbovnc-users/bc11ef0b-4a54-4001-93ef-7c67582fc392n%40googlegroups.com
<https://groups.google.com/d/msgid/turbovnc-users/bc11ef0b-4a54-4001-93ef-7c67582fc392n%40googlegroups.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the Google Groups "TurboVNC
User Discussion/Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to turbovnc-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/turbovnc-users/c522e179-cb75-768a-6ff9-8e2ee86776c9%40virtualgl.org.
