** Changed in: systemd (Ubuntu Oracular)
Status: New => In Progress
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to systemd in Ubuntu.
https://bugs.launchpad.net/bugs/2044104
Title:
[UBUNTU 20.04] chzdev -e is rebuilding initramfs even with
zdev:early=0 set
Status in Ubuntu on IBM z Systems:
New
Status in s390-tools package in Ubuntu:
Fix Released
Status in systemd package in Ubuntu:
In Progress
Status in s390-tools source package in Oracular:
Fix Released
Status in systemd source package in Oracular:
In Progress
Bug description:
Versions:
Ubuntu 20.04.5 s390-tools version 2.12.0-0ubuntu3.7.s390x
Ubuntu 22.04.2 s390-tools version 2.20.0-0ubuntu3.2.s390x
When I configure a zfcp LUN persistently via chzdev, the initrd is
being rebuilt even with parameter zdev:early=0
root@a8315003:~# chzdev -e zfcp-lun
0.0.1803:0x500507630910d430:0x4019409200000000 zdev:early=0
zFCP LUN 0.0.1803:0x500507630910d430:0x4019409200000000 configured
Note: The initial RAM-disk must be updated for these changes to take effect:
- zFCP LUN 0.0.1803:0x500507630910d430:0x4019409200000000
update-initramfs: Generating /boot/initrd.img-5.15.0-60-generic
I: The initramfs will attempt to resume from /dev/dasdb1
I: (UUID=e70ecb80-4d1e-4074-9cda-ce231ad6e698)
I: Set the RESUME variable to override this.
Using config file '/etc/zipl.conf'
Building bootmap in '/boot'
Adding IPL section 'ubuntu' (default)
Preparing boot device: dasda (c00a).
Done.
root@a8315003:~#
== Comment: - Thorsten Diehl <thorsten.di...@de.ibm.com> - 2023-03-01
06:55:47 ==
@BOE-dev
This behaviour is unexpected.
https://www.ibm.com/docs/en/linux-on-systems?topic=commands-chzdev says:
Activating a device early during the boot process
Use the zdev:early device attribute to activate a device early during
the boot process and to override any existing auto-configuration with
a persistent device configuration.
zdev:early=1
The device is activated during the initial RAM disc phase according to
the persistent configuration.
zdev:early=0
The device is activated as usual during the boot process. This is the
default. If auto-configuration data is present, the device is activated during
the initial RAM disc phase according to the auto-configuration.
I can't interprete a SCSI LUN as a device with auto configuration
data. (At least, if the zfcp device hasn't NPIV enabled)
== Comment: #5 - Peter Oberparleiter <peter.oberparlei...@de.ibm.com> -
2023-03-01 11:18:28 ==
(In reply to comment #2)
> @BOE-dev
> This behaviour is unexpected.
> https://www.ibm.com/docs/en/linux-on-systems?topic=commands-chzdev says:
> Activating a device early during the boot process
>
> Use the zdev:early device attribute to activate a device early during the
> boot process and to override any existing auto-configuration with a
> persistent device configuration.
>
> zdev:early=1
> The device is activated during the initial RAM disc phase according to
> the persistent configuration.
>
> zdev:early=0
> The device is activated as usual during the boot process. This is the
> default. If auto-configuration data is present, the device is activated
> during the initial RAM disc phase according to the auto-configuration.
The documentation is incorrect for Ubuntu. Canonical specifically
builds zdev in a way that every change to persistent device
configuration causes an update to the initial RAM-disk. See also:
https://bugzilla.linux.ibm.com/show_bug.cgi?id=187578#c35
https://github.com/ibm-s390-linux/s390-tools/commit/7dd03eaeecdd0e2674f145aca34be1275d291bd8
> I can't interprete a SCSI LUN as a device with auto configuration data. (At
> least, if the zfcp device hasn't NPIV enabled)
This is related to auto-configuration as implemented for DPM.
== Comment: #6 - Thorsten Diehl <thorsten.di...@de.ibm.com> - 2023-03-03
12:41:44 ==
So, IIUC, chzdev is built for Ubuntu with ZDEV_ALWAYS_UPDATE_INITRD=1, which
make the parameter zdev:early=0 ineffective. Correct?
If you confirm, you may also close this bug.
Not nice - then we have to find an alternate solution.
== Comment: #7 - Peter Oberparleiter <peter.oberparlei...@de.ibm.com> -
2023-03-07 06:48:07 ==
(In reply to comment #6)
> So, IIUC, chzdev is built for Ubuntu with ZDEV_ALWAYS_UPDATE_INITRD=1, which
> make the parameter zdev:early=0 ineffective. Correct?
> If you confirm, you may also close this bug.
>
> Not nice - then we have to find an alternate solution.
chzdev -p on Ubuntu will by default rebuild the initrd. This is intended
behavior by Canonical and controlled by the ZDEV_ALWAYS_UPDATE_INITRD
build-time
switch. You can suppress it by adding option --no-root-update to the command
line.
Specifying zdev:early=0 to chzdev has exactly the effect that it is supposed
to
have: it tells zdev not to enable that device during initrd processing,
resulting in the corresponding udev rule not being copied to the initrd [1].
Unfortunately there is another Ubuntu-initrd script [2] that simply copies ALL
udev rules, including those created by zdev, into the initrd. As a result,
zdev's early-attribute handling is rendered useless and all devices are
enabled,
even if a user specified zdev:early=0.
Since this bug report indicates that there is a use-case for this function in
Ubuntu, it might be worth asking Canonical if current processing could be
changed to provide a way for users to specify that a device should
specifically
NOT be enabled within initrd processing.
Technically this could easily be done:
1) Have the generic udev initramfs script not copy zdev-generated Udev rules,
OR
have the zdev initramfs script remove those rules (somewhat of a hack)
2) Change the zdev initramfs script logic from the current:
- enable devices required for the root file system, AND
- enable devices for which zdev:early=1 was specified
to
- enable all persistently configured devices EXCEPT those for which
zdev:early=0 was specified
This change would be needed to maintain Canonical's policy of enabling
all devices in the initrd by default
I'm open to adding the change in 2) to our s390-tools package, but someone at
Canonical would need to work out a way to implement 1).
[1]
https://github.com/ibm-s390-linux/s390-tools/blob/master/zdev/initramfs/hooks/s390-tools-zdev#L47
[2]
https://git.launchpad.net/~ubuntu-core-dev/ubuntu/+source/systemd/tree/debian/extra/initramfs-tools/hooks/udev#n42
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-z-systems/+bug/2044104/+subscriptions
--
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help : https://help.launchpad.net/ListHelp
