Public bug reported:
Under pavucontrol, I get four options (see below) : Mono Input, Analog
Stereo Output, Digital Stereo (IEC958) Output, or Off. All options work
fine (beside caveats below) but I am missing the Duplex mode.
Recording works on Ardour if I set 8kHz sample rate. Other software
(Mixxx) refuse to open the input probably because the sample rate
(44.1kHz or 48kHz generally) apply to output and input, presumably. Any
side answer on this point would be nice too, but my main concern is
activating Duplex mode.
This report is close, but different, to bug 2048897 with a different
adapter (has same missing Duplex mode, but Loop110 works worse : no
usable sound).
$ pactl list
Card #13
Name: alsa_card.usb-Qualcomm_Avantree_DG60P_A4DC15BFFAA7DE239586-02
Driver: module-alsa-card.c
Owner Module: 37
Properties:
alsa.card = "2"
alsa.card_name = "Avantree DG60P"
alsa.long_card_name = "Qualcomm Avantree DG60P at
usb-0000:00:14.0-13.1.1, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:14.0-usb-0:13.1.1:1.2"
sysfs.path =
"/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.1/1-13.1.1/1-13.1.1:1.2/sound/card2"
udev.id = "usb-Qualcomm_Avantree_DG60P_A4DC15BFFAA7DE239586-02"
device.bus = "usb"
device.vendor.id = "0a12"
device.vendor.name = "Cambridge Silicon Radio, Ltd"
device.product.id = "4007"
device.product.name = "Avantree DG60P"
device.serial = "Qualcomm_Avantree_DG60P_A4DC15BFFAA7DE239586"
device.string = "2"
device.description = "Avantree DG60P"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
Profiles:
input:mono-fallback: Mono Input (sinks: 0, sources: 1,
priority: 1, available: yes)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources:
0, priority: 6500, available: yes)
output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1,
sources: 0, priority: 5500, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:analog-stereo
Ports:
analog-input-headset-mic: Headset Microphone (type: Headset,
priority: 8800, latency offset: 0 usec, availability unknown)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:mono-fallback
analog-output: Analog Output (type: Analog, priority: 9900,
latency offset: 0 usec, availability unknown)
Part of profile(s): output:analog-stereo
iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF,
priority: 0, latency offset: 0 usec, availability unknown)
Part of profile(s): output:iec958-stereo
$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 22.04.3 LTS
Release: 22.04
Codename: jammy
$ apt-cache policy alsa-base
alsa-base:
Installed: 1.0.25+dfsg-0ubuntu7
Candidate: 1.0.25+dfsg-0ubuntu7
Version table:
*** 1.0.25+dfsg-0ubuntu7 500
500 http://archive.ubuntu.com/ubuntu jammy/main amd64 Packages
500 http://archive.ubuntu.com/ubuntu jammy/main i386 Packages
100 /var/lib/dpkg/status
System is up to date (apt update ; apt upgrade)
ProblemType: Bug
DistroRelease: Ubuntu 22.04
Package: alsa-base 1.0.25+dfsg-0ubuntu7
ProcVersionSignature: Ubuntu 5.15.0-91.101-lowlatency 5.15.131
Uname: Linux 5.15.0-91-lowlatency x86_64
ApportVersion: 2.20.11-0ubuntu82.5
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC2: marcel 4814 F.... pulseaudio
/dev/snd/controlC0: marcel 4814 F.... pulseaudio
/dev/snd/controlC1: marcel 4814 F.... pulseaudio
CasperMD5CheckResult: unknown
CurrentDesktop: XFCE
Date: Fri Jan 12 17:23:15 2024
InstallationDate: Installed on 2023-02-13 (333 days ago)
InstallationMedia: Ubuntu-Studio 22.04.1 LTS "Jammy Jellyfish" - Release amd64
(20220809)
PackageArchitecture: all
RebootRequiredPkgs: Error: path contained symlinks.
SourcePackage: alsa-driver
Symptom: audio
Symptom_AlsaRecordingTest: ALSA recording test through plughw:DG60P successful
Symptom_Card: Avantree DG60P - Avantree DG60P
Symptom_PulseAudioRecordingTest: PulseAudio recording test through plughw:DG60P
failed
Symptom_Type: None of the above
Title: [USB-Audio - Avantree DG60P, recording] Recording problem
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 02/18/2021
dmi.bios.release: 5.17
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: UX582LR.203
dmi.board.asset.tag: ATN12345678901234567
dmi.board.name: UX582LR
dmi.board.vendor: ASUSTeK COMPUTER INC.
dmi.board.version: 1.0
dmi.chassis.asset.tag: No Asset Tag
dmi.chassis.type: 10
dmi.chassis.vendor: ASUSTeK COMPUTER INC.
dmi.chassis.version: 1.0
dmi.modalias:
dmi:bvnAmericanMegatrendsInc.:bvrUX582LR.203:bd02/18/2021:br5.17:svnASUSTeKCOMPUTERINC.:pnZenBookProDuoUX582LR_UX582LR:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnUX582LR:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0:sku:
dmi.product.family: ZenBook
dmi.product.name: ZenBook Pro Duo UX582LR_UX582LR
dmi.product.version: 1.0
dmi.sys.vendor: ASUSTeK COMPUTER INC.
mtime.conffile..etc.modprobe.d.alsa-base.conf: 2023-03-02T20:23:08.273376
** Affects: alsa-driver (Ubuntu)
Importance: Undecided
Status: New
** Tags: amd64 apport-bug jammy
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/2049218
Title:
[USB-Audio - Avantree DG60P, recording] Duplex is missing
Status in alsa-driver package in Ubuntu:
New
Bug description:
Under pavucontrol, I get four options (see below) : Mono Input, Analog
Stereo Output, Digital Stereo (IEC958) Output, or Off. All options
work fine (beside caveats below) but I am missing the Duplex mode.
Recording works on Ardour if I set 8kHz sample rate. Other software
(Mixxx) refuse to open the input probably because the sample rate
(44.1kHz or 48kHz generally) apply to output and input, presumably.
Any side answer on this point would be nice too, but my main concern
is activating Duplex mode.
This report is close, but different, to bug 2048897 with a different
adapter (has same missing Duplex mode, but Loop110 works worse : no
usable sound).
$ pactl list
Card #13
Name: alsa_card.usb-Qualcomm_Avantree_DG60P_A4DC15BFFAA7DE239586-02
Driver: module-alsa-card.c
Owner Module: 37
Properties:
alsa.card = "2"
alsa.card_name = "Avantree DG60P"
alsa.long_card_name = "Qualcomm Avantree DG60P at
usb-0000:00:14.0-13.1.1, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:14.0-usb-0:13.1.1:1.2"
sysfs.path =
"/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.1/1-13.1.1/1-13.1.1:1.2/sound/card2"
udev.id = "usb-Qualcomm_Avantree_DG60P_A4DC15BFFAA7DE239586-02"
device.bus = "usb"
device.vendor.id = "0a12"
device.vendor.name = "Cambridge Silicon Radio, Ltd"
device.product.id = "4007"
device.product.name = "Avantree DG60P"
device.serial = "Qualcomm_Avantree_DG60P_A4DC15BFFAA7DE239586"
device.string = "2"
device.description = "Avantree DG60P"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
Profiles:
input:mono-fallback: Mono Input (sinks: 0, sources: 1,
priority: 1, available: yes)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources:
0, priority: 6500, available: yes)
output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1,
sources: 0, priority: 5500, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:analog-stereo
Ports:
analog-input-headset-mic: Headset Microphone (type: Headset,
priority: 8800, latency offset: 0 usec, availability unknown)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:mono-fallback
analog-output: Analog Output (type: Analog, priority: 9900,
latency offset: 0 usec, availability unknown)
Part of profile(s): output:analog-stereo
iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF,
priority: 0, latency offset: 0 usec, availability unknown)
Part of profile(s): output:iec958-stereo
$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 22.04.3 LTS
Release: 22.04
Codename: jammy
$ apt-cache policy alsa-base
alsa-base:
Installed: 1.0.25+dfsg-0ubuntu7
Candidate: 1.0.25+dfsg-0ubuntu7
Version table:
*** 1.0.25+dfsg-0ubuntu7 500
500 http://archive.ubuntu.com/ubuntu jammy/main amd64 Packages
500 http://archive.ubuntu.com/ubuntu jammy/main i386 Packages
100 /var/lib/dpkg/status
System is up to date (apt update ; apt upgrade)
ProblemType: Bug
DistroRelease: Ubuntu 22.04
Package: alsa-base 1.0.25+dfsg-0ubuntu7
ProcVersionSignature: Ubuntu 5.15.0-91.101-lowlatency 5.15.131
Uname: Linux 5.15.0-91-lowlatency x86_64
ApportVersion: 2.20.11-0ubuntu82.5
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC2: marcel 4814 F.... pulseaudio
/dev/snd/controlC0: marcel 4814 F.... pulseaudio
/dev/snd/controlC1: marcel 4814 F.... pulseaudio
CasperMD5CheckResult: unknown
CurrentDesktop: XFCE
Date: Fri Jan 12 17:23:15 2024
InstallationDate: Installed on 2023-02-13 (333 days ago)
InstallationMedia: Ubuntu-Studio 22.04.1 LTS "Jammy Jellyfish" - Release
amd64 (20220809)
PackageArchitecture: all
RebootRequiredPkgs: Error: path contained symlinks.
SourcePackage: alsa-driver
Symptom: audio
Symptom_AlsaRecordingTest: ALSA recording test through plughw:DG60P successful
Symptom_Card: Avantree DG60P - Avantree DG60P
Symptom_PulseAudioRecordingTest: PulseAudio recording test through
plughw:DG60P failed
Symptom_Type: None of the above
Title: [USB-Audio - Avantree DG60P, recording] Recording problem
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 02/18/2021
dmi.bios.release: 5.17
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: UX582LR.203
dmi.board.asset.tag: ATN12345678901234567
dmi.board.name: UX582LR
dmi.board.vendor: ASUSTeK COMPUTER INC.
dmi.board.version: 1.0
dmi.chassis.asset.tag: No Asset Tag
dmi.chassis.type: 10
dmi.chassis.vendor: ASUSTeK COMPUTER INC.
dmi.chassis.version: 1.0
dmi.modalias:
dmi:bvnAmericanMegatrendsInc.:bvrUX582LR.203:bd02/18/2021:br5.17:svnASUSTeKCOMPUTERINC.:pnZenBookProDuoUX582LR_UX582LR:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnUX582LR:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0:sku:
dmi.product.family: ZenBook
dmi.product.name: ZenBook Pro Duo UX582LR_UX582LR
dmi.product.version: 1.0
dmi.sys.vendor: ASUSTeK COMPUTER INC.
mtime.conffile..etc.modprobe.d.alsa-base.conf: 2023-03-02T20:23:08.273376
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/2049218/+subscriptions
--
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help : https://help.launchpad.net/ListHelp
