Does this cert indicate only Realtek is certified?
The lsusb output is:
Bus 001 Device 002: ID 0a5c:5832 Broadcom Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0a5c Broadcom Corp.
idProduct 0x5832
bcdDevice 1.01
iManufacturer 1 Broadcom Corp
iProduct 2 5880
iSerial 3 0123456789ABCD
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 139
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 254 Application Specific Interface
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 4 Broadcom USH
** UNRECOGNIZED: 10 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 11 Chip/SmartCard
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 5 Contacted SmartCard
ChipCard Interface Descriptor:
bLength 54
bDescriptorType 33
bcdCCID 1.00
nMaxSlotIndex 0
bVoltageSupport 7 5.0V 3.0V 1.8V
dwProtocols 3 T=0 T=1
dwDefaultClock 4000
dwMaxiumumClock 4000
bNumClockSupported 0
dwDataRate 9600 bps
dwMaxDataRate 250000 bps
bNumDataRatesSupp. 0
dwMaxIFSD 247
dwSyncProtocols 00000000
dwMechanical 00000000
dwFeatures 000102BA
Auto configuration based on ATR
Auto voltage selection
Auto clock change
Auto baud rate change
Auto PPS made by CCID
NAD value other than 0x00 accepted
TPDU level exchange
dwMaxCCIDMsgLen 271
bClassGetResponse 00
bClassEnvelope 00
wlcdLayout none
bPINSupport 0
bMaxCCIDBusySlots 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 1
Device Status: 0x0000
(Bus Powered)
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pcsc-lite in Ubuntu.
https://bugs.launchpad.net/bugs/1835297
Title:
Precision 7730 smart card reader does not work out of box
Status in pcsc-lite package in Ubuntu:
New
Bug description:
The Canonical certified smart card reader will not function until the
following commands are run:
sudo mkdir /tmp/USH
cd /tmp/USH
sudo mkdir debs
cd debs
sudo wget https://http.kali.org/pool/main/p/pcsc-lite/libpcsclite-
dev_1.8.24-1_amd64.deb
sudo wget https://http.kali.org/pool/main/p/pcsc-
lite/libpcsclite1_1.8.24-1_amd64.deb
sudo wget https://http.kali.org/pool/main/p/pcsc-
lite/pcscd_1.8.24-1_amd64.deb
sudo wget https://http.kali.org/pool/main/p/pcsc-tools/pcsc-
tools_1.5.4-1_amd64.deb
cd ..
sudo apt-get -f install -y
sudo apt purge lib-pcsc* pcscd* -y
sudo apt install ./debs/*.deb --install-recommends -y sudo apt-get
install libusb-1.0-0-dev sudo wget https://alioth-
archive.debian.org/releases/pcsclite/ccid/1.4.25/ccid-1.4.25.tar.bz2
sudo tar xvfj ccid-*.tar.bz2
cd ccid-1.4.25/
./configure
sudo make
sudo make install
sudo cp src/92_pcscd_ccid.rules /etc/udev/rules.d/
sudo systemctl restart pcscd
sudo systemctl status pcscd
sudo pcsc_scan
Additionally, the following commands, which do the same thing as the
above in a cleaner way, do NOT resolve the issue in both the OEM and
public image:
sudo apt install -y libpcsclite-dev libpcsclite1 pcscd pcsc-tools
libusb-1.0-0 libusb-1.0-0-dev libccid libacsccid1
sudo systemctl restart pcscd
sudo systemctl status pcscd
sudo pcsc_scan
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/pcsc-lite/+bug/1835297/+subscriptions
--
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help : https://help.launchpad.net/ListHelp
