1.8.2-1 from cosmic also has this regression <debug> [1556659895.024512] Starting detailed registration state check <debug> [1556659895.024533] Skipping detailed registration state check <debug> [1556659895.024543] All CDMA registration state checks done <debug> [1556659895.024636] Will start keeping track of state for subsystem 'cdma1x' <info> [1556659895.024671] Modem /org/freedesktop/ModemManager1/Modem/0: state changed (enabled -> registered) <debug> [1556659895.024907] Periodic signal checks enabled <debug> [1556659895.024921] Periodic signal check refresh requested <debug> [1556659895.024931] loading signal quality... <debug> [1556659895.024956] (rfcomm0) device open count is 4 (open) <debug> [1556659895.025046] Will start keeping track of state for subsystem 'evdo' <debug> [1556659895.025076] Modem is currently registered in a CDMA network (CDMA1x: 'yes', EV-DO: 'no') <info> [1556659895.025092] Simple connect state (6/8): Bearer <debug> [1556659895.025104] Creating new bearer... <debug> [1556659895.025120] Creating Broadband bearer in broadband modem <debug> [1556659895.025620] (rfcomm0) device open count is 5 (open) <debug> [1556659895.025679] (rfcomm0) device open count is 4 (close) <info> [1556659895.026094] Simple connect state (7/8): Connect <debug> [1556659895.026129] Connecting bearer '/org/freedesktop/ModemManager1/Bearer/0' <info> [1556659895.026155] Modem /org/freedesktop/ModemManager1/Modem/0: state changed (registered -> connecting) <debug> [1556659895.026456] Launching 3GPP2 connection attempt <debug> [1556659895.026485] (rfcomm0) device open count is 5 (open) <debug> [1556659895.026495] Connection through a plain serial AT port (rfcomm0) <debug> [1556659895.026515] (rfcomm0) device open count is 6 (open) <debug> [1556659895.026554] (rfcomm0) device open count is 5 (close) <debug> [1556659895.026584] (rfcomm0): --> 'AT+CSS?<CR>' <debug> [1556659895.049351] (rfcomm0): <-- '<CR><LF>?, 26<CR><LF><CR><LF>OK<CR><LF>' <debug> [1556659895.049510] Starting detailed registration state check <debug> [1556659895.049527] Skipping detailed registration state check <debug> [1556659895.049537] All CDMA registration state checks done <debug> [1556659895.049702] Initial CDMA registration checks finished <debug> [1556659895.049727] (rfcomm0) device open count is 4 (close) <debug> [1556659895.049766] (rfcomm0): --> 'AT+CSQ<CR>' <debug> [1556659895.070553] (rfcomm0): <-- '<CR><LF>22, 99<CR><LF><CR><LF>OK<CR><LF>' <debug> [1556659895.070772] Modem /org/freedesktop/ModemManager1/Modem/0: signal quality updated (70) <debug> [1556659895.070809] EVDO registration: 0 <debug> [1556659895.070818] CDMA1x registration: 1 <debug> [1556659895.070825] Fallback access tech: 0x00000400 <debug> [1556659895.070836] Fallback access technology: 0x00000400 <debug> [1556659895.070867] (rfcomm0) device open count is 3 (close) <debug> [1556659895.071116] Modem /org/freedesktop/ModemManager1/Modem/0: access technology changed (unknown -> 1xrtt) <debug> [1556659895.071149] Periodic signal quality checks scheduled in 30s <debug> [1556659895.071290] (rfcomm0): --> 'ATDT#777<CR>' <debug> [1556659896.924337] (rfcomm0): <-- '<CR><LF>CONNECT 2400000<CR><LF>' <debug> [1556659896.924406] [rfcomm0] Setting flow control: rts-cts <debug> [1556659896.924414] (rfcomm0): enabling RTS/CTS flow control <debug> [1556659896.924431] (rfcomm0): port now connected <debug> [1556659896.924450] Connected bearer '/org/freedesktop/ModemManager1/Bearer/0' <info> [1556659896.924532] Modem /org/freedesktop/ModemManager1/Modem/0: state changed (connecting -> connected) <info> [1556659896.924655] Simple connect state (8/8): All done <debug> [1556659896.924705] (rfcomm0) device open count is 2 (close) <debug> [1556659896.952641] (net/ppp0): adding device at sysfs path: /sys/devices/virtual/net/ppp0 <debug> [1556659896.952743] [filter] (net/ppp0) port filtered: virtual device <debug> [1556659925.033012] Running registration checks (CDMA1x: 'yes', EV-DO: 'yes') <debug> [1556659925.033073] Will skip all QCDM-based registration checks <debug> [1556659925.033086] Will skip generic detailed registration check, we don't have Sprint commands <debug> [1556659925.033111] loading signal quality... <debug> [1556659925.033158] Starting QCDM-based registration checks <debug> [1556659925.033169] Skipping all QCDM-based checks and falling back to AT-based checks <debug> [1556659925.033210] Starting AT-based registration checks <debug> [1556659925.033260] Couldn't refresh signal quality: 'No AT port available to run command' <debug> [1556659925.033324] EVDO registration: 0 <debug> [1556659925.033346] CDMA1x registration: 1 <debug> [1556659925.033375] Fallback access tech: 0x00000400 <debug> [1556659925.033389] Fallback access technology: 0x00000400 <debug> [1556659925.033448] No CDMA service found <debug> [1556659925.033470] All CDMA registration state checks done <debug> [1556659925.033565] Connected bearer not registered in CDMA network <debug> [1556659925.033686] Periodic signal quality checks scheduled in 30
-- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to modemmanager in Ubuntu. https://bugs.launchpad.net/bugs/1819615 Title: For additional hardware support, modemmanager needs to be upgraded to 1.10 on Bionic Status in OEM Priority Project: In Progress Status in libmbim package in Ubuntu: Fix Released Status in libqmi package in Ubuntu: Fix Released Status in modemmanager package in Ubuntu: Fix Released Status in libmbim source package in Bionic: Fix Committed Status in libqmi source package in Bionic: Fix Committed Status in modemmanager source package in Bionic: Fix Committed Bug description: [Impact] * The new modemmanager package adds DW5820e and DW5821 support. * This modemmanager version is needed to support new devices. [Test Case] * install modemmanager, libmbim, and libqmi from -proposed * reboot and try WWAN function to see if any regression there. * perform general dogfooding of its reverse dependencies (network- manager, gnome-control-center etc.) [Regression Potential] * The package comes from Disco and should not have regression there. * Every new upstream release can potentially break existing dependencies if any of the required features have been changed/removed, so besides regular testing a general dogfooding session with the new modemmanager is advised. [Original Description] To have Bionic, the current LTS, working with as wide of a range of modems as possible we need to have it upgraded to the current 1.10 versions. Also the underlying libraries need to get upgraded appropriately. To manage notifications about this bug go to: https://bugs.launchpad.net/oem-priority/+bug/1819615/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
