It seems I have a similar issue. After resume a connection dialog appears where the (correct) password is given. Connecting is still not possible (the dialog reappears in a loop, no connection established).
Cancelling and connecting from the menu works fine. This looks like a similar old issue where the reconnect logon dialog messed up the encryption. (just my impression). -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1635907 Title: Can't connect to Wifi network after suspend and resume Status in network-manager package in Ubuntu: New Bug description: Beginning in Ubuntu 16.04 and getting worse after upgrading to 16.10, I can't connect to wifi networks after suspending and resuming my laptop. I have a Sony Vaio SVP112A1CL with wireless network controller Intel Corporation Wireless 7260 (rev 6b). Typically I have to restart NetworkManager to recover from the problem (sudo systemctl restart NetworkManager). This seemed to be a reliable way to recover in 16.04, but it doesn't always work in 16.10 and may require a reboot. In some related bug reports they requested we run `sudo iw dev wlan0 scan` which resulted initially in an error but after running it a few times returned successfully. I'll attach the output below. Even though it did return, the wifi network still was unable to reconnect. I'll try to grab the errors next time, but if I do it now, I'll lose connectivity. $ apt-cache policy network-manager network-manager: Installed: 1.2.4-0ubuntu1 Candidate: 1.2.4-0ubuntu1 Version table: *** 1.2.4-0ubuntu1 500 500 http://us.archive.ubuntu.com/ubuntu yakkety/main amd64 Packages 100 /var/lib/dpkg/status $ sudo iw dev wlan0 scan BSS d4:05:98:46:d9:40(on wlan0) -- associated TSF: 2690064842954 usec (31d, 03:14:24) freq: 2457 beacon interval: 100 TUs capability: ESS Privacy ShortPreamble ShortSlotTime APSD (0x0c31) signal: -68.00 dBm last seen: 3728 ms ago Information elements from Probe Response frame: SSID: stevens-2G Supported rates: 1.0* 2.0* 5.5* 11.0* 9.0 18.0 36.0 54.0 DS Parameter set: channel 10 ERP: <no flags> Extended supported rates: 6.0 12.0 24.0 48.0 Country: US Environment: Indoor/Outdoor Channels [1 - 11] @ 36 dBm HT capabilities: Capabilities: 0x1ec HT20 SM Power Save disabled RX HT20 SGI RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 3839 bytes No DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 4 usec (0x05) HT RX MCS rate indexes supported: 0-23 HT TX MCS rate indexes are undefined HT operation: * primary channel: 10 * secondary channel offset: no secondary * STA channel width: 20 MHz * RIFS: 0 * HT protection: no * non-GF present: 1 * OBSS non-GF present: 0 * dual beacon: 0 * dual CTS protection: 0 * STBC beacon: 0 * L-SIG TXOP Prot: 0 * PCO active: 0 * PCO phase: 0 WPA: * Version: 1 * Group cipher: TKIP * Pairwise ciphers: TKIP CCMP * Authentication suites: PSK RSN: * Version: 1 * Group cipher: TKIP * Pairwise ciphers: TKIP CCMP * Authentication suites: PSK * Capabilities: 1-PTKSA-RC 1-GTKSA-RC (0x0000) WMM: * Parameter version 1 * u-APSD * BE: CW 15-1023, AIFSN 3 * BK: CW 15-1023, AIFSN 7 * VI: CW 7-15, AIFSN 2, TXOP 3008 usec * VO: CW 3-7, AIFSN 2, TXOP 1504 usec BSS Load: * station count: 5 * channel utilisation: 28/255 * available admission capacity: 31250 [*32us] Extended capabilities: HT Information Exchange Supported Country: US Environment: Indoor/Outdoor Channels [1 - 11] @ 16 dBm WPS: * Version: 1.0 * Wi-Fi Protected Setup State: 2 (Configured) * Response Type: 3 (AP) * UUID: bc329e00-1dd8-11b2-8601-d4059846d940 * Manufacturer: Celeno Communication, Inc. * Model: Celeno Wireless AP 2.4G * Model Number: CL1800 * Serial Number: 12345678 * Primary Device Type: 6-0050f204-1 * Device name: CELENOAP24G * Config methods: Label, Display, Keypad * RF Bands: 0x1 * Unknown TLV (0x1049, 6 bytes): 00 37 2a 00 01 20 BSS 52:f5:da:94:bf:f3(on wlan0) TSF: 155449958912 usec (1d, 19:10:49) freq: 2457 beacon interval: 100 TUs capability: ESS Privacy ShortSlotTime (0x0411) signal: -66.00 dBm last seen: 3736 ms ago Information elements from Probe Response frame: SSID: \x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00 Supported rates: 6.0* 9.0 12.0* 18.0 24.0* 36.0 48.0 54.0 DS Parameter set: channel 10 TIM: DTIM Count 1 DTIM Period 2 Bitmap Control 0x0 Bitmap[0] 0x2 ERP: <no flags> RSN: * Version: 1 * Group cipher: CCMP * Pairwise ciphers: CCMP * Authentication suites: PSK * Capabilities: 16-PTKSA-RC 1-GTKSA-RC (0x000c) HT capabilities: Capabilities: 0x1ad RX LDPC HT20 SM Power Save disabled RX HT20 SGI TX STBC RX STBC 1-stream Max AMSDU length: 3839 bytes No DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 4 usec (0x05) HT RX MCS rate indexes supported: 0-15 HT TX MCS rate indexes are undefined HT operation: * primary channel: 10 * secondary channel offset: no secondary * STA channel width: 20 MHz * RIFS: 0 * HT protection: non-HT mixed * non-GF present: 0 * OBSS non-GF present: 1 * dual beacon: 0 * dual CTS protection: 0 * STBC beacon: 0 * L-SIG TXOP Prot: 0 * PCO active: 0 * PCO phase: 0 Extended capabilities: Extended Channel Switching WPS: * Version: 1.0 * Wi-Fi Protected Setup State: 2 (Configured) * Unknown TLV (0x1049, 6 bytes): 00 37 2a 00 01 20 * Device name: Steven's Fire TV stick * Primary Device Type: 1-0050f204-9 WMM: * Parameter version 1 * u-APSD * BE: CW 15-1023, AIFSN 3 * BK: CW 15-1023, AIFSN 7 * VI: CW 7-15, AIFSN 2, TXOP 3008 usec * VO: CW 3-7, AIFSN 2, TXOP 1504 usec P2P: * Group capa: 0x25, Device capa: 0xab * Unknown TLV (0x03, 6 bytes): f5 da 94 3f f3 00 BSS d4:05:98:46:d9:45(on wlan0) TSF: 2690065103372 usec (31d, 03:14:25) freq: 5200 beacon interval: 100 TUs capability: ESS Privacy ShortPreamble APSD (0x0831) signal: -66.00 dBm last seen: 3520 ms ago SSID: stevens Supported rates: 6.0* 9.0 12.0* 18.0 24.0* 36.0 48.0 54.0 DS Parameter set: channel 40 Country: US Environment: Indoor/Outdoor Channels [36 - 64] @ 36 dBm HT capabilities: Capabilities: 0x1ee HT20/HT40 SM Power Save disabled RX HT20 SGI RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 3839 bytes No DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 4 usec (0x05) HT RX MCS rate indexes supported: 0-23, 32 HT TX MCS rate indexes are undefined HT operation: * primary channel: 40 * secondary channel offset: below * STA channel width: any * RIFS: 0 * HT protection: no * non-GF present: 1 * OBSS non-GF present: 0 * dual beacon: 0 * dual CTS protection: 0 * STBC beacon: 0 * L-SIG TXOP Prot: 0 * PCO active: 0 * PCO phase: 0 RSN: * Version: 1 * Group cipher: CCMP * Pairwise ciphers: CCMP * Authentication suites: PSK * Capabilities: 1-PTKSA-RC 1-GTKSA-RC (0x0000) WMM: * Parameter version 1 * u-APSD * BE: CW 15-1023, AIFSN 3 * BK: CW 15-1023, AIFSN 7 * VI: CW 7-15, AIFSN 2, TXOP 3008 usec * VO: CW 3-7, AIFSN 2, TXOP 1504 usec BSS Load: * station count: 8 * channel utilisation: 0/255 * available admission capacity: 31250 [*32us] Country: US Environment: Indoor/Outdoor Channels [36 - 64] @ 16 dBm WPS: * Version: 1.0 * Wi-Fi Protected Setup State: 2 (Configured) * Response Type: 3 (AP) * UUID: bc329e00-1dd8-11b2-8601-d4059846d945 * Manufacturer: Celeno Communication, Inc. * Model: Celeno Wireless AP 5G * Model Number: CL1800 * Serial Number: 12345678 * Primary Device Type: 6-0050f204-1 * Device name: CelenoAP5G * Config methods: Label, Display, Keypad * RF Bands: 0x2 * Unknown TLV (0x1049, 6 bytes): 00 37 2a 00 01 20 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1635907/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
