Hello,
I should activate an asymmetrical FTTH connection (1000/200). I should
buy a new router in order to manage properly this bandwidth. If
possible, I would run an exit relay instance in the router too. I was
thinking to buy an APU4 board or the RockPro64. Does someone have tested
this boards as routers or exit relays? What kind of performance can I
expect from such boards as exit relays or routers?
Cheers
Gigi
Il 26/07/19 21:08, Neel Chauhan ha scritto:
About having a relay on gigabit symmetrical FTTH, you don't just need
a good server, you also need a good NAT router unless you want to use
your server as a NAT router as well.
I don't have Sonic or Gigabit Fiber (from any ISP), but I have 300mbps
symmetrical Verizon FiOS in Brooklyn, NY running a Tor middle relay. A
Linksys running OpenWrt and many low-power Mini PC "firewall" boxes
were a bottleneck even on 300 Mbps for Tor, despite having a powerful
Xeon 4108 HPE ProLiant ML110 Gen10 and having no Verizon router in my
setup. I dabbled with using my ML110 as a PF firewall (I run FreeBSD),
but yesterday, I installed a HP ProDesk 400 G4 as an OPNsense firewall
(because I didn't want a single point of failure, and so I can
remotely access iLO).
So your firewall needs to be more powerful than an average one because
at least for me Tor has ~10000 connections at once, and that is with
Tor only measuring half my 300Mbps. Your Gigabit will mean far more
than that running Tor. So a low power HP T620 Plus or Qotom box won't
work as a firewall in this case.
My "bottleneck" could also be Verizon's peering that Sonic may not
have. After all, Sonic supports Net Neutrality and Verizon opposes NN.
About the server, I have a powerful HPE ProLiant as mentioned earlier,
but like other said at minimum you need a i5/i7 CPU, or an equivalent
Xeon or AMD CPU. So this means no NUCs or HPE MicroServers.
-Neel
===
https://www.neelc.org/
On 2019-07-26 01:31, Mitar wrote:
Hi!
I have Sonic Fiber which offers gigabit symmetric connection. I am
thinking of using it for gigabit Tor relay, but I wonder what would be
good hardware to use for something like that. Information I have found
[1] is from 2010 so I wonder if there are any updates? Is there any
simple small box I could use? Like Intel NUC? Information here [2]
says that one can get 400 Mbps with AES-NI. And so with two processes
limit per my public IP this would be around 800 Mbps then. Is this
still a reasonable expectation? Do I have to care about the network
card to serve gigabit (besides its being nominally gigabit)? What
would be memory requirements for such a device?
[1] https://www.mail-archive.com/or-talk@freehaven.net/msg14159.html
[2] https://www.torservers.net/wiki/setup/server
Mitar
_______________________________________________
tor-relays mailing list
tor-relays@lists.torproject.org
https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
_______________________________________________
tor-relays mailing list
tor-relays@lists.torproject.org
https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
