On 5/28/2020 1:06 PM, fmoeves wrote:
I'm going from memory so... I've seen a video of a simple detector. In the video the guy ran along the feedline while transmitting low power. You could see if there was a signal on the outside of the cable. I'll look later to see if I find.
Tony's feedline is buried, so could be tricky. But it IS right to move the probe along the feedline to find a current max, because the current varies along the line because it would be acting as part of the antenna.
73, Jim K9YC _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
