I see they're all from China. Perhaps from Wuhan? ; -) 73, Mike W0BTU
On Sun, Mar 1, 2020, 6:30 PM <[email protected]> wrote: > There's no shortage of 2N5109s on eBay for about one dollar each > > > www.ebay.com/sch/i.html?_from=R40&_nkw=2n5109&_sacat=0&_sop=15 > > > 73 > Frank > W3LPL > > ----- Original Message ----- > > From: "VE6WZ_Steve" <[email protected]> > To: "Richard (Rick) Karlquist" <[email protected]> > Cc: "Topband" <[email protected]> > Sent: Sunday, March 1, 2020 11:56:39 PM > Subject: Re: Topband: 9 circle RX array combiner board > > Hi Rick, > > Yes, the 2N5109s are almost un-obtainium now, but a few months ago Mouser > stocked them and maybe DigiKey, but now they are out-of-stock. Even the > 2N3866 substitute is hard to find. > Over the years (2 decades) I have built at least 10 of these amps, and > still have a supply of a dozen or so 2N5109 devices, and since these > devices are almost indestructible, I’ll likely never run out! You are > correct that this is a problem with this design. > > Thanks for the E-field amp link….nice…perhaps another project to build! > > I like KiCad a lot. super easy to learn. I had never use a PC board > program, but I was able to learn KiCad from scratch in one evening! > > de steve ve6wz > > > > > > > Now I know why you work stuff I can't even hear :-) > > > > The 2N5109 is just about extinct. Did you secure a > > source for it before you laid out your PC board? If > > you did, please share it with the rest of us. Most > > people are now using substitutes for the 2N5109 with > > varying degrees of success. Are you possibly doing > > that? Of course those substitutes are not in a > > hermetic metal can, so the PC board has to be laid > > out for differently for them. > > > > You might want to look at these references for > > so-called "E-field" arrays of whip antennas: > > > > A military design: > > > > > https://www.dst.defence.gov.au/sites/default/files/publications/documents/DST-Group-TR-3522.pdf > > > > Various improvements to the above: > > > > > http://home.earthlink.net/~christrask/Complementary%20Push-Pull%20Amplifiers.pdf > > > > You also find a lot of other good stuff on Chris's site. > > > > They go beyond the DXE design. > > > > Good luck with your project. > > > > BTW, how do you like KICAD? I'm currently using a grandfathered > > EAGLE 7.7 perpetual license, but "some day" I might switch to KICAD. > > > > 73 > > Rick N6RK > > _________________ > Searchable Archives: http://www.contesting.com/_topband - Topband > Reflector > > _________________ > Searchable Archives: http://www.contesting.com/_topband - Topband > Reflector > _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
