This happens due new low band DXers trying to apply Beverage antenna
info. Then asking for assistance.
Harold Beverage first had a low wire over by Otter Creek Maine, but
it was high up on the rocks well above the Beach/salt water..(minimum
earth to wire capacitance for the frequency)
New DXers need to have a name to point them toward useful
information.
73
Bruce-K1FZ
"Artek Manuals"
To: [email protected]
Cc:
Sent: Tuesday December 3 2019 6:21:20PM
Subject: Re: Topband: BOG
You sit around in the pub for long thinking these UP?
I just built a LOG myself ( Loop on Ground) ... I also modeled a SLOG
(
square loop on ground) but decided that it wasn't very good
Dave
NR1DX
On 12/3/2019 5:56 PM, Mike Smith VE9AA wrote:
> polliwog
>
> piece of long limp inductive wire on ground
>
>
>
> Mike, Coreen & Corey
>
> Keswick Ridge, NB
>
>
>
> _________________
> Searchable Archives: http://www.contesting.com/_topband [1] -
Topband Reflector
--
Dave
[email protected]
www.ArtekManuals.com
_________________
Searchable Archives: http://www.contesting.com/_topband [2] - Topband
Reflector
Links:
------
[1] http://www.contesting.com/_topband
[2] http://www.contesting.com/_topband
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
