I used porcelain insulators with a lag screw on one end and screwed them into the opposing sides of the 4x4 support posts. I threaded the wd1a through the large hole in the insulators, and adjusted the tension at the end post. Very easy, and trouble-free. Jim w8zr Sent from my iPhone
> On Apr 13, 2017, at 7:58 AM, Rob Atkinson <[email protected]> wrote: > > Why don't you nail or screw a cross piece of needed length to the top > of each post, and screw a threaded porcelain standoff insulator so it > sticks up on each end. You can find them at hamfests. They are > usually white porcelain cylinders with tapped holes on each end. > Since it is only for receiving there might be an even easier hardware > fix. You could probably transmit with my construction. > > Rob > K5UJ > _________________ > Topband Reflector Archives - http://www.contesting.com/_topband _________________ Topband Reflector Archives - http://www.contesting.com/_topband
