Jim, If I remember correctly placing an additional transmitting type cap across the units load cap did the job. Don't remember the value I used. My guess 100 or 200 PF. I used a cap I had in the junk box. You will need to remove the cap in most cases for the other bands. Rich AA2MF
Sent from my iPad > On Dec 17, 2015, at 01:17, Jim Murray via Topband <[email protected]> > wrote: > > Anybody know how to make an SB-1000 tune properly on 160? Ok on other bands > but doesn't like 160, dummy load or well tuned Inv.L. Is it a quirk of the > amp needing a modification or possibly a bad component? Saw nothing obvious > before putting it to use but have not had the cover off since.Thanks,Jimk2hn > _________________ > Topband Reflector Archives - http://www.contesting.com/_topband _________________ Topband Reflector Archives - http://www.contesting.com/_topband
