Hello Clive; Check out the IV3PRK website- www.iv3prk.it under "receiving antennas" and then the "rx ant. tests" tab.Luis has a circuit using a 1.843 crystal oscillator. I use the same device without the tuned circuit, just hanging a 1 meter wire off the outputpin and it works fine for me, tweaking receiving loops. However, you may need the tuned output circuit plus an amplifier if you are working at 10 wavelengths. The only thing I added was a multivibrator circuit to key the oscillator on and off to discern from any other possible signals.
Russ, N3CO From: Clive GM3POI <[email protected]> To: 'TopBand List' <[email protected]> Sent: Tuesday, November 25, 2014 7:29 AM Subject: Topband: Signal source Hi, Can anyone recommend a stable low power signal source suitable for tweaking RX antennas. I only need 160m and will only be used within say 10 wavelengths. Preferably something off the shelf. Thanks Clive GM3POI _________________ Topband Reflector Archives - http://www.contesting.com/_topband _________________ Topband Reflector Archives - http://www.contesting.com/_topband
