How is inteference on rotor or relay boxes?I thinking 1kw generate magnetic radiation into cables ??? How u solve this guys ?? Tnx
---Sent by iphoneLB3RE LJ3RE K3RAG ex: LA6FJAwww.lb3re.com ~ Rag ~ Stein Roar Brobakken e-mail:[email protected]http://la5o.wordpress.comwww.contesting.no Reading about 3-wire cages and the like, I feel a serious case of shunt envy. Mine is a single wire about 18 inches from one corner of my Rohn 25, connected to the tower at about 50 feet. I used an omega match with a couple of 3 KV transmitting variables, because my tower is quite tall for 160 (97 feet with 3 yagis, 2 on top) and I could not find a 50-ohm point.It was absurdly easy to adjust and seems to work quite well at 100 watts. I'm sure there are better solutions (including Herb's), but this was really simple. 73, Pete N4ZR Check out the Reverse Beacon Network at http://reversebeacon.net, blog at reversebeacon.blogspot.com. For spots, please go to your favorite ARC V6 or VE7CC DX cluster node. On 8/26/2014 5:12 PM, Don wrote: > I would like to get on 160 this question most likely has been asked a 1000 > time but I need information as how or can I shunt feed my 55 ft rohn 45 . > > Don > _________________ > Topband Reflector Archives - http://www.contesting.com/_topband > _________________ Topband Reflector Archives - http://www.contesting.com/_topband _________________ Topband Reflector Archives - http://www.contesting.com/_topband
