Jack W0UCE Many thanks for keeping the new info continually posted to ur website. I know that this work takes a lot of time and effort.
I have a question re the diagram of ur personal FCP and Inv L. Your diagram shows the transformer box and antenna feed point BELOW the FCP. In my future installation I would like to do it that way .... The vert section of my Inv L is approx 52ft and the existing feedpoint is actually just a foot or so above the radials. I don't want to loose vertical height so I was thinking of installing the transformer 3 ft above ground while keeping the FCP at the recommended height of 8ft suspended with insulators between 2x4 pressure treated posts. The vertical wire would come down the side of my tower and attach to a post through an insulator and then run back up a short distance of to get to the antenna terminal on the transformer box. If I were to do it that way the FCP would actually be approx 5ft ABOVE the antenna feed point and the total length of the vertical section would still be 50-52ft. Also there would be a approx 5ft wire from the feed point of the FCP to reach the FCP terminal on the box. Any comments? Frank VO1HP _______________________________________________ UR RST IS ... ... ..9 QSB QSB - hw? BK
