I agree with Bob. When in Ayer Island, OC-177, 2007, I also used the KD9SV transformer and performed very well indeed. FYI.
Jo, YC0LOW On Tue, Sep 6, 2011 at 12:26 PM, ROBERT HARMON <[email protected]> wrote: > > KD9SV offers the transformer and 900 ohm resistor for the pennant antenna, > ready to go, very inexpensive. I am using his kit and works great. > It is stock number SV-PEN on his website: http://www.radiobooks.com/ > > > Bob > K6UJ > > > > > > > On Sep 5, 2011, at 3:10 PM, Hardy Landskov wrote: > > > I used 2--1800 ohm, 1 watt resistors in parallel. The resistance came out > to > > be 920 ohms but close enough to see that the F/B ratio was 25 db or so. > > 73 Hardy N7RT > > > > ----- Original Message ----- > > From: <[email protected]> > > To: <[email protected]> > > Sent: Monday, September 05, 2011 9:50 AM > > Subject: Topband: Termination resistor for 160-80- Pennant antenna > > (Receiveonly) > > > > > >> The 160-80 pennant antenna calls for a 900 ohm termination resistor. > >> Since 900 is not a standard resistor value, what is the best way to > >> accomplish this? Not enough room for a beverage at this qth! > >> > >> Thanks > >> > >> Allan W2TN > >> _______________________________________________ > >> UR RST IS ... ... ..9 QSB QSB - hw? BK > > > > _______________________________________________ > > UR RST IS ... ... ..9 QSB QSB - hw? BK > > _______________________________________________ > UR RST IS ... ... ..9 QSB QSB - hw? BK > _______________________________________________ UR RST IS ... ... ..9 QSB QSB - hw? BK
