I was able to get it working with a one line patch to screen.c, but I
wouldn't recommend this to anyone since I'm not knowledgeable enough to
know the side effects.
--- screen.c.orig 2012-03-16 09:29:58.151917000 -0400
+++ screen.c 2012-03-16 09:30:09.208923000 -0400
@@ -97,7 +97,7 @@
void
screen_set_cursor_style(struct screen *s, u_int style)
{
- if (style <= 4)
+ if (style <= 6)
s->cstyle = style;
}
On Fri, Mar 16, 2012 at 8:36 AM, Michael Krysiak <mrk...@gmail.com> wrote:
> I'm completely new to this stuff, so I'm not sure what the proper behavior
> is supposed to be, but from a quick experiment using Cygwin's xterm, it
> behaved just like tmux did; 0-4 work, 5 and 6 don't change anything.
>
> On Fri, Mar 16, 2012 at 8:17 AM, Nicholas Marriott <
> nicholas.marri...@gmail.com> wrote:
>
>> Yes, that's right. We can allow higher values through, but what do they
>> do on other terminals like xterm?
>>
>>
>> On Fri, Mar 16, 2012 at 07:39:57AM -0400, Michael Krysiak wrote:
>> > After a bit more research, it looks like the mintty docs show a 5
>> and 6,
>> > but the official docs only show 0-4. *
>> > [1]http://vt100.net/docs/vt510-rm/DECSCUSR*
>> >
>> > On Fri, Mar 16, 2012 at 6:02 AM, Michael Krysiak <[2]
>> mrk...@gmail.com>
>> > wrote:
>> >
>> > I got it from*
>> > [3]http://code.google.com/p/mintty/wiki/CtrlSeqs#Cursor_style*
>> >
>> > On Fri, Mar 16, 2012 at 5:40 AM, Nicholas Marriott
>> > <[4]nicholas.marri...@gmail.com> wrote:
>> >
>> > 6 is not a valid cursor style, only 0-4. where did you get 6
>> from?
>> >
>> > On Fri, Mar 16, 2012 at 05:22:49AM -0400, Michael Krysiak wrote:
>> > > * *I'm using mintty with xterm-256colors and en_US.UTF-8. *My
>> > ultimate goal
>> > > * *is to have my Vim cursor change to a vertical line in
>> insert mode
>> > and a
>> > > * *block in command mode, and this works fine outside of tmux
>> but
>> > fails with
>> > > * *it. *However, the problem can be reproduced without the
>> > additional Vim
>> > > * *layer.
>> > > * *Without tmux (cursor starts as a block):
>> > > * *$ echo -n -e '\033[4 q' *#Works. *Cursor is now an underline
>> > > * *$ echo -n -e '\033[6 q' *#Works. *Cursor is now a vertical
>> line
>> > > * *$ echo -n -e '\033[2 q' *#Works. *Cursor is back to a block
>> > > * *With tmux (cursor starts as a block):
>> > > * *$ tmux
>> > > * *$ echo -n -e '\033[4 q' *#Works. *Cursor is now an underline
>> > > * *$ echo -n -e '\033[6 q' *#Does not works. *Cursor remains an
>> > underline
>> > > * *$ echo -n -e '\033[2 q' *#Works. *Cursor is back to a block
>> > >
>> > > * *On Fri, Mar 16, 2012 at 3:33 AM, Nicholas Marriott
>> > > * *<[1][5]nicholas.marri...@gmail.com> wrote:
>> > >
>> > > * * *Can you give me a clear sequence of commands that shows
>> the
>> > problem?
>> > > * * *Also what terminal are you using?
>> > >
>> > > * * *On Thu, Mar 15, 2012 at 10:43:40PM -0400, Michael Krysiak
>> > wrote:
>> > > * * *> * *I'm currently unable to change my cursor to line in
>> tmux
>> > 1.6 when
>> > > * * *using
>> > > * * *> * *'\033[6 q' as defined in*
>> > > * * *> * *[1][2][6]
>> http://code.google.com/p/mintty/wiki/CtrlSeqs,
>> > but the block
>> > > * * *(\033[0 q)
>> > > * * *> * *and underline (\033[4 q) work as expected. *If I set
>> my
>> > cursor to a
>> > > * * *line
>> > > * * *> * *(echo -n -e '\033[6 q') prior to starting tmux, then
>> it
>> > remains a
>> > > * * *line
>> > > * * *> * *once in tmux. *However as soon as I set it to a
>> block or
>> > underline,
>> > > * * *I'm no
>> > > * * *> * *longer able to set it back to a line.
>> > > * * *> * *I haven't been able to find anything in the source
>> that
>> > could be
>> > > * * *causing
>> > > * * *> * *this issue. *Does anyone have any ideas?
>> > > * * *>
>> > > * * *> References
>> > > * * *>
>> > > * * *> * *Visible links
>> > > * * *> * *1. [3][7]
>> http://code.google.com/p/mintty/wiki/CtrlSeqs
>> > >
>> > > * * *>
>> > > * *
>> >
>>
>> *------------------------------------------------------------------------------
>> > > * * *> This SF email is sponsosred by:
>> > > * * *> Try Windows Azure free for 90 days Click Here
>> > > * * *> [4][8]http://p.sf.net/sfu/sfd2d-msazure
>> > >
>> > > * * *> _______________________________________________
>> > > * * *> tmux-users mailing list
>> > > * * *> [5][9]tmux-users@lists.sourceforge.net
>> > > * * *>
>> > [6][10]https://lists.sourceforge.net/lists/listinfo/tmux-users
>> > >
>> > > References
>> > >
>> > > * *Visible links
>> > > * *1. mailto:[11]nicholas.marri...@gmail.com
>> > > * *2. [12]http://code.google.com/p/mintty/wiki/CtrlSeqs
>> > > * *3. [13]http://code.google.com/p/mintty/wiki/CtrlSeqs
>> > > * *4. [14]http://p.sf.net/sfu/sfd2d-msazure
>> > > * *5. mailto:[15]tmux-users@lists.sourceforge.net
>> > > * *6. [16]
>> https://lists.sourceforge.net/lists/listinfo/tmux-users
>> >
>> > References
>> >
>> > Visible links
>> > 1. http://vt100.net/docs/vt510-rm/DECSCUSR
>> > 2. mailto:mrk...@gmail.com
>> > 3. http://code.google.com/p/mintty/wiki/CtrlSeqs#Cursor_style
>> > 4. mailto:nicholas.marri...@gmail.com
>> > 5. mailto:nicholas.marri...@gmail.com
>> > 6. http://code.google.com/p/mintty/wiki/CtrlSeqs
>> > 7. http://code.google.com/p/mintty/wiki/CtrlSeqs
>> > 8. http://p.sf.net/sfu/sfd2d-msazure
>> > 9. mailto:tmux-users@lists.sourceforge.net
>> > 10. https://lists.sourceforge.net/lists/listinfo/tmux-users
>> > 11. mailto:nicholas.marri...@gmail.com
>> > 12. http://code.google.com/p/mintty/wiki/CtrlSeqs
>> > 13. http://code.google.com/p/mintty/wiki/CtrlSeqs
>> > 14. http://p.sf.net/sfu/sfd2d-msazure
>> > 15. mailto:tmux-users@lists.sourceforge.net
>> > 16. https://lists.sourceforge.net/lists/listinfo/tmux-users
>>
>
>
------------------------------------------------------------------------------
This SF email is sponsosred by:
Try Windows Azure free for 90 days Click Here
http://p.sf.net/sfu/sfd2d-msazure
_______________________________________________
tmux-users mailing list
tmux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/tmux-users
